A "Y" connector bracket for garden hoses
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to hold a 2 way hose splitter in place. The lower block is tapered to force a tight fit into the bracket.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
A "Y" connector bracket for garden hoses. A bracket to hold a 2 way hose splitter in place. The lower block is tapered to force a tight fit into the bracket. Attach the main body first and then place the block up against the fitting and screw in place. I always use pilot holes when fastening to wood. Be sure not to tighten the screws too much as to crack the plastic.
I used ABS for this outside project choosing strength profiles.
This was made to fit a common brand I had (see photos) but may not suit all types of splitters.