1 / 4
Dual Material Ash Tray
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this because most specialty filaments are PLA, but PLA can't handle the heat.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With this two-piece design, you can use beautiful PLA for the outer shell, and a heat-resistant material for the inner tray. You can also change the outer shell style whenever you want.
Materials shrink differently, so watch out for the tolerances. For my print, I used asa for tray and pla marble for the shell. If it doesn't fit, just change the scale. For extra safety, you can put a wet tissue or a little water inside the tray.
Enjoy the print.