Liczymy pasujące modele…
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have been constantly getting lost when playing Gloomhaven so i decided to create a dashboard for players that would save some space on the table and help to organize your stuff. It lets you manage basicly everything you need during…
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Imprints clay with a lovely splash texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🇺🇸 Welcome to Washington D.C.! Continuing with the project of recreating the National Mall in Washington D.C. for the MiniWorld3D catalog, here is the Capitol Building , heavily remixed and improved by Dany Sánchez from the original…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
16Nov2024 - Uploaded V2 model which has a shorter front wall and deeper cut to the rear with a larger radii up to the top. This was created to provide a splash guard to the PETLIBRO DockStream pet water fountain in order to prevent water…
Wydruk około 7,81 €–9,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…
Wydruk około 3,06 €–3,73 € nettoWstępna wycena jednego wariantu
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
All possible M6 washers. If you download the stl you can make them even taller.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Collection of mud flaps for the front and back of the 3DSets Landy. Overview Logo 4x4 Mountain. LandR. Logo. **** Printed with PLA and 0.25 nozzle, color change at 0.65.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
Washer fluid lid for cars, 55mm diameter, Peugeot Partner, Citroen Berlingo and other models. The lid keeps the washer fluid safe for dirt if you are missing the original lid. Designed to fit direct on filler-neck. Fits well, a bit hard…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ash William's chainsaw multi-material print. This model was originally created by jrichey97 . The version here is cleaned up, scaled, and prepped for MMU printing. Note: The 3MF file uses PrusaSlicer objects and MMU painting feature. I do…
Wydruk około 11,73 €–14,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Count Spatula : Cars : Crash Derby Car The wheel base section needs to be glued to the truck frame No I repeat no AI was used to make this.!!!!! This is produced with blender.
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Modular player or unit dashboard for Mage Knight. Each module can hold one unit/player card, a command token and a skill token. It's quick to print and make it easy to organise your army. You will need at least 5 modules per player.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Portable Flashlight It only takes a CR2032 battery and a LED to build this portable flashlight. The LED is attached to the portable-flashlight-led-clip which makes contact with the battery when the portable-flashlight-slider is moved…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Simple lateral flashlight holder for picatinny rail. This mount allows the user to turn on/off the light using the index finger without need of a special torch switch. In the picture was mounted a 25 mm diameter torch on an airsoft…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
I needed a replacement cover for the TTL flash socket on my Olympus OM-4 Ti. You can find some on eBay for 10€ that look nice and are 3D printed. But I couldn't find their 3D model online, so I made my own. It's not as pretty, but it…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Money Tic Tac Toe This version of Tic Tac Toe, aims to introduce a more exciting component in the challenge of winning. It can be played with Tokens/coins of Dollar (black) and Euro (orange), created for this purpose. After the end of the…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remodel the original part in solidworks and added a vertical splash guard. This prevents the coffee powder from splashing over the portafilter. If you only need the main holder you can download the solidworks file and remove the splash…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
I needed extended body mounts for a monster slash build and didnt want to buy them. Printed in PETG, we will see how well they hold up but its cheap to print spares uses m2.6 x 12mm wood screws to attach the posts
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
Flashlight holster designed specifically for the Sofirn IF22A. Parametric .f3d file included so you can customize the clip to your needs. Easily remixable for other flashlights. Updated model no longer has a bottom, unlike in the photos.…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A box for four eyelashes. Dimensions: 100.00 x 78.00 x 13.00 mm Small, low. Perfect for travel. With metal, unbreakable hinges. Box inlay, printed separately. It may be in a different color. The following can be used for hinges and hooks:…
Wydruk około 6,42 €–7,85 € nettoWstępna wycena jednego wariantu
This is an add-on for the Tool-Check Modular from the Wera Advent Calendar 2024. It can be easily inserted into the existing rail. It is suitable for the following S11 LED flashlight. (RovyVon A5) The head of my lamp has a diameter of…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Finally had chance to remix a model https://www.printables.com/model/131862-desktop-whomp-rocket I and my son had a lot of fun with! The idea was if the water could be used to launch the rocket, helping with the hard-to-achieve sealing in…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The 12 gauge shells I modeled seemed to be just about the right size for a neat little stash container, so I modified the 2.75 inch regular brass version, hollowing it out and threading the hull and brass case pieces. I printed mine using…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
I printed some "Trash Bin for Sweeper Car" https://www.printables.com/model/324597-trash-bin-for-sweeper-car-popelnice-pro-cistici-vu). I use them to collect filament poop from changing material, support structures etc. But there is no…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
If you have a 2005 thru 2008 Ford Mustang then you know of this big plug in the dash to cover the large hole if you don't have the MyColor option. This cover simply snaps into place and allows you to add your aftermarket amp's gain…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Feets for Ender 3 using squash balls
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
37mm diameter diffuser for Ledlenser P7 (P7R excluded), T7 series Print settings: Filament: Translucent filaments. Layer height: 0.3mm Supports: no Perimeters: 2 Scale factors: ±100.6% for PETG was perfect fit, In my case
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,35 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…
Wydruk około 5,91 €–7,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have designed a splash guard for the Knock Box Mini. At the back is still space for a can with cleaning tablets. So that is no longer so much dirty when tapping the coffee powder.
Wydruk około 18,52 €–22,64 € nettoWstępna wycena jednego wariantu
Give a clean look to your fashion with a hinged-cover over your sewn buttons. These octagonal buttons have a print-in-place hinge & snap-clasp to cover the threads. In addition to your choice of colors, the look can be changed based on…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This is the flag for the city of Washington D.C. Fun fact, I found out that the flag's official dimensions are a bit longer then a standard flag. At my usual scale it would not fit on the Mk4 build plate due to the length. So I have…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
Hello, I have a set for the Airsoft Flashlight from Anycubic. It is specially designed for mounting on a 21mm R.I.S sheet. Designed for use on Airsoft weapons or on a helmet. The individual parts need to be glued together with super glue.…
Wydruk około 4,68 €–5,72 € nettoWstępna wycena jednego wariantu
Add a bin to your Multiboard wall !
Wydruk około 0,45 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Waterproof card with 100 dimples. Push the dimple with a sharp object to turn the dimple into a hole and track something. Can be used for tracking wash cycles of personal protective equipment such as high-visibility clothing.
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Change parameters in Fusion 360 to generate your custom washer. Changeable parameters are I believe self explanatory: innerDiameter - inside diameter of hole of the washer outerDiameter - outside diameter of the washer thickness -…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena jednego wariantu
Platform with 25mm height for Nespresso CitiZ to lift the cup higher so it does not splash when making a coffee. Fits into bottom center hole so it stays in a fixed position. If you have any questions or need a different height, feel free…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
I created My Combat Flashlight Ring for everyone, who need a Combat Flashlight Ring for flashlight :-) I tried to design my new model for my friend, who need a Flashlight ring for his specific flashlight. So I looked on internet for some…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bodywork supplement washer shim for Carson CV-10. Printed in PLA at 0.2 Arandela suplemento carrocería VW Golf Rc Carson CV-10. Imprimido en PLA a 0.2.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
each print file will give you 30 washers in one print of the desire diameter.
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
So its a desktop holder for the GB Flash by LesserCuma and GeekSimon, it was printed with the Creality Ender 3 V2 and PLA plastic. Made for 2.5cm thick desktop.
Wydruk około 7,65 €–9,35 € nettoWstępna wycena jednego wariantu
This remix repositions the ball joint to the side of the mount, giving the dashboard phone holder a much wider range of usable angles. The original design—and the ball supplied with the holder—assumes the phone sits directly in line with…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smash! If you like my models, please like, share, download, make and all the amazing good stuff! Most Dice Towers are awesome additions to your board game experience. But it doesn't make rolling the dice any easier. If anything, it makes…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
Base The base includes bolts , nuts and washers of M2 - M48 . Separately models are placed in specific folders. All data collected in All_in_one.dwg file (autocad). !Attention! Be careful when using for accuracy critical parts (or use…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
Inspired by the brilliant design of Giskard Reventlov ( original model here ), I present the Auto Wash HydroBowl V2 , a complete reimagining of the original concept — now in an expanded 240mm version . This is not a remix — it's a full…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…
An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…
Saw a few of these posted, but decided to design my own. A half twist of the knob switches between "Cllean" and "Dirty". I printed the Letters.stl in 2 colors. The first 1mm was the printed in the desired letter color (white). The rest…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com > As with many innovative solutions there can be…
Multicolor dishwasher sign no painting/MMU The sliding mechanism feels very satisfactory because the magnet makes it snap into place. I printed everything at 100% for a snug fit. So the text plates and magnets don't require any glue, i do…
Hose guides for washing your car. It stops a hose from getting stucked under the wheel. Print with PET and 4 perimeters for strength. You will need a M8x60 screw and a flat washer.
Improved version with display installation from the inside (without frame). _____________________________________________________________________________ Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
If you like my designs, please feel free to use the “Donate” button now here on Printables, even a dollar is greatly appreciated! July 3 2023 NEW LARGE version! More room between slots for ease of fingers to grab! Plus 16 slots total…
🇺🇸 Welcome to Washington D.C.! This model was created by Alexis Hudson @ alectrodesign In addition to looking great, this is also a beautiful lamp that can be lit from inside with LED lights ! The White House is the official residence and…
I remixed some playerdash boards for Gloomhaven found on thingiverse. For the supports I recommend to place custom a few lines and enable the bridge function in your slicers. (consult the pictures) Remixed from:…
He’s definitely going to need supports, and I also recommend scaling him up nice and big before slicing if you want stability and the fine details. Have fun with this, and if you want to see more, give a like and follow me. If you have…
Although KitchenAid stand mixer is coming with an acrylic cover it does not protect you properly from nasty splashes when you mix on the highest speed (e.g. making whipped cream or butter). This is a dead simple splash guard for the 4.8 l…
I've remixed this from the original one-piece model I found and sectioned into 4 pieces, 2 pieces per plate, this lid riser for the Flashforge Adventurer 5M Pro. Without the riser, the filament tube rubs on the clear plastic lid. I had…
These clip standoffs fit snuggly in the honeycomb tray of my Nova 24/60 Thunder Laser. They lift the material .125" off the tray, the clips hold it securely in place while the support standoffs are for supporting the center span, if…
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed Just clips in to existing spindle hex hole at the end. Remove number support after printing with…
This is my version of a hose guide system, designed to print in two separate pieces. I wanted to avoid using any hardware because, realistically, I would probably forget to remove it at some point and end up destroying it. So I decided to…
This is a remix of the Splash guard for 3D Printy's Modular Desktop Fountain . I noticed that when water splashed onto the original splash guard, the water would trickle down the splash guard, between the guard and the base, and outside…
I didn' see one of these for my printer, so i used stonegas's file and remade the lower brackets to fit the A5M Pro. This model fits inside the frame where the top cover goes and uses 608 bearings just like the original. Included the STEP…
Splash Yourself - Water Gun The funny water sprayer for the bathtub! Simple & Easy Print without support. Use a rubber band for the slot to seal it better. My creation for the printables bathtub contest.💦 Enjoy the parts and happy…
This knitted-style dolphin is the perfect mix of ocean vibes and cozy charm! With a smooth body and a friendly smile, it's a great print for marine animal lovers. The model prints easily with minimal supports. The eyes are printed…
Планшет персонажа для настольной игры "Немезида". Из трех частей. Ремикс. Изменения: Все места для карт с учетом что они в протекторах; Увеличенные высоты для колод действий и сбора; Слегка изменил хранение кубов в качестве боеприпасов…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Snow Pea Peashooter, Tabletop DnD miniature 25 mm medium base which can be used for DnD…
One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…
A compact underbarrel flashlight add-on for the G26 Fidget Keychain, designed to give your slide-action toy a more tactical look. Simple to print, easy to assemble, and fully compatible with the original model. No glue required…
Print in PLA with a 0.04mm nozzle with 0.02 mm layer thickness. White and orange works well as does white and black.
Printable front bezel compatible with micro desktop computer models 3060, 5060, 7060. Add some colour to your dull desktop machine. In a corporate environment it is also helpful if you want to identify machines by grouping them in colour,…
A scaled-down version of the original. Many bathroom products come with pumps to extract the bottle contents, but the tubes on the bottom of the pumps don't reach all the way to the bottom of the bottle. Thus, after the pump stops…
Introduction This is a remix of the excellent dirty/clean dishwasher sign by Printess . It differs in that the base is printed vertically with two colors of filament, with the color changing midway up at about 45mm. That way, the dirty…
Small pedal trash can / storage container round and rectangular designs Removable waste bin for workshop, table, kitchen, bath ... 17 cm / 6.7 inch height (larger scalable) Printing Print parts in the given orientation! the connecting…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
I wanted a base for my AD5X that would route the power switch to the front of the printer and add storage for tools. I wanted a lip around the corners of the printer to help ensure the printer did not wobble off, but I wanted to retain…
Please Read Description Only thing to be aware of is the Z offset in Nozzle Settings! Currently set at 0 to ensure your bed isn't going to get damaged but for my machine its set to -0.12, First layer prints at 0.15mm so allowing for great…
Men of the World! Stand together and make your mark. Show your appreciation with this urinal splash screen set. Featuring black and white portraits of four of our favorite folks—Donald Trump, J.D. Vance, Elon Musk, and Vladimir Putin…
Evil killer from forsaken. If you don't print him in PETG with tree supports, he will gashing wound you. He has many chainsaws for you to choose what to put on him. Slasher: Kiki-mama. (You're a dead man) Survivor: oh yeah, how about,…
Remix of a LOTR Journeys in Middle Earth player dashboard I came across. Modeled up from scratch in fusion360 to add player card holder slits, plenty of inspiration token holders, and works with the sleeves on the smaller cards. I had to…
Use the M600 command to change the color on a layer You can print with layers thickness of 0.1 0.15 0.2 0.3 mm The first color is 2 mm, the next ones are 0.6 mm, the file names contain the order of the colors To get the best results…
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
This is a wall-mounted trash can to put your leftover filament in or to collect other waste. The easy-to-use hanging system allows it to be placed on horizontal and vertical cement joint lines. This trash can has a capacity of 10 cm deep…
This is a remix: https://www.thingiverse.com/thing:4394842 Mud guard for the front and back of the 3DSets Landy. Logo land rover
![Nespresso CitiZ Cup Platform [No splashing]](https://media.printables.com/media/prints/dca0da2e-8cd2-4acf-b2fa-143e065ff519/images/11938791_5519e87d-7a7d-4780-9048-79a02fc45567_f67606ad-f57a-489b-9c37-46452b94e57e/img_7881.png)
