Stock Jeep Wrangler TJ hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The greatest generation
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: TJdesert.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x138.8mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.15997mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#ee5068 PLA Atomic Trans Neon Pink Transmission Distance: 60
#e23636 PLA Cookiecad Ruby Red Elixir Transmission Distance: 9
#fd636b PLA Jessie Premium Neon Pink Transmission Distance: 2.9
#f59753 PLA Overture Matte Orange Transmission Distance: 2.7
#f3d561 PLA PolyLite Pro Light Yellow Transmission Distance: 2.6
#ffffff PLA Polymaker Polysonic White Transmission Distance: 6.2
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Trans Neon Pink
At layer #11 (0.96mm) swap to Ruby Red Elixir
At layer #16 (1.36mm) swap to Neon Pink
At layer #18 (1.52mm) swap to Orange
At layer #20 (1.68mm) swap to Light Yellow
At layer #21 (1.76mm) swap to Polysonic White for the rest.