Warhammer Mini Display Tray — 28 mm & 32 mm Bases (10 slots)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display & transport tray for Warhammer minis. 10 recessed slots: 5× 28 mm and 5× 32 mm round bases. Prints flat, no supp
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
What is this?
A simple display and transport tray for Warhammer miniatures, designed by someone who got tired of minis sliding around in a shoebox. Drop your based models into snug recesses so they stay put on the shelf, on the painting desk, or in the bag on the way to game night.
The plate holds 10 minis in two rows of mixed base sizes:
5 recesses sized for 28 mm round bases
5 recesses sized for 32 mm round bases
Each hole is a shallow pocket that locates the base without gripping it too tightly, so models lift out easily but won't rattle around in transit.
Why use this?
Mixed base support — handles both 28 mm and 32 mm rounds on a single plate, so you can mix unit types
Transport-friendly — recesses stop minis sliding into each other and chipping paint
Display-ready — neat, uniform spacing for a painted squad on the shelf
Cheap and reprintable — print as many as your collection demands, no foam trays to buy
Print Settings
Material: PLA or PETG (PETG if it'll get knocked around in a bag)
Layer height: 0.2 mm
Infill: 15% Gyroid
Supports: Not required — prints flat, holes face up
Instructions
Print flat on the bed with the recesses facing up. No supports or glue needed. Drop your based minis straight into the pockets. If your bases are a tight fit, give the recesses a quick pass with a craft knife or light sanding to ease them in.
Sizing note
Recesses are sized for nominal 28 mm and 32 mm Games Workshop round bases. There's a little manufacturing variation between base batches and a little print variation between machines, so if your first print is snug, scale the model up 1–2% in your slicer for a looser fit.
Payment
This model is offered up for free. If you choose to use it, please attribute credit accordingly. If you get use out of it and wish to say thanks, please feel free to buy me a coffee using the QR code in the photos attached, or at buymeacoffee.com/DarthTiberius :)