Coping Saw Miter Jig for Thin Boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a miter jig for coping saws (leaf saw, laubsäge) for cutting miters into long, thin boards.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a miter jig I designed to saw long, thin boards with a coping saw in SolveSpace. The jig holds the board at a fixed position and angle and provides a slot for the saw to perform the cut. A slot on the side allows the jig to be clamped to a table. I recommend also drawing a line onto the board (where the cut should be) as a reference to ensure the cut remains straight.
While the STL and STEP provided are intended for a 45 degree cut with a board no larger than 10mm tall, these parameters can easily be adjusted using the source file (.slvs) in SolveSpace.