Coping Saw Miter Jig for Thin Boards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a miter jig for coping saws (leaf saw, laubsäge) for cutting miters into long, thin boards.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a miter jig I designed to saw long, thin boards with a coping saw in SolveSpace. The jig holds the board at a fixed position and angle and provides a slot for the saw to perform the cut. A slot on the side allows the jig to be clamped to a table. I recommend also drawing a line onto the board (where the cut should be) as a reference to ensure the cut remains straight.
While the STL and STEP provided are intended for a 45 degree cut with a board no larger than 10mm tall, these parameters can easily be adjusted using the source file (.slvs) in SolveSpace.