STRYFE - 3D Printed 5" Optimized Topology Drone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printed Drone Frame (Designed to be printable on smaller 3D printers). Inspired by ProgrammaDan's Dragonfly FPV Drone
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
TEST FLIGHT: https://youtube.com/shorts/oiSVrfM4jPY?si=SMwh-cmVWzysh2-i
A drone I designed using Fusion 360's Generative design tools.
Instructions:
Screw the bottom onto each arm - 8x m4 screws
Screw in the camera to the camera mount - 2x m2 screws
Screw in the camera to the frame - 2x m3 screws
Screw in the FC stack - 4x m3
Thread wires through arms - 4x
Screw in motors, prop guards, landing gear
Solder in wires - motors, VTX, ELRS, power, capacitor (I had to cut some of them down to fit better, I followed the amazon listings for the wiring)
Thread the Velcro strip through the top 2 slits
Screw on the top - 8x m4 screws, 2x m3 screws
Test the motors using BetaFlight (direction and order)
Configure BetaFlight
Strap in battery
Start Flying!
BOM - These were the cheapest parts I could find:
FC/ESC stack: Amazon.com: SoloGood F405 55A FPV Stack ICM42688P F405 Flight Controller BLHELI_S 55A 4in1 ESC 30.5X30.5mm 2-6S for FPV Freestyle Drones Parts : Industrial & Scientific
Motors: MAD BSC 2207.5 1750KV 1950KV 2100KV FPV Motor for 5 inch FPV Drone, N52H Magnets, Compatible with 6S LiPo for Racing and Freestyle (2100KV) - Amazon.com
Props: Amazon.com: 8pcs HQProp 5X4.8X3 V1S 5048 5 Inch 3-Blade Propellers Set (4X CW / 4X CCW) Poly Carbonate (Black) : Toys & Games
Batteries: Amazon.com: OVONIC 14.8V 120C 1500mAh 4S Lipo Battery Battery with XT60 Plug for FPV Drone Quadcopter Helicopter Airplane RC Boat RC Car RC Models(2 Pack) : Toys & Games
ELRS/Remote Control: https://www.amazon.com/dp/B0FJFL51RV?ref=ppx_yo2ov_dt_b_fed_asin_title
Charger: Amazon.com: ISDT PD60S XT60 Connector 60W 6A Battery Balance Charger Type-C Input for 1-4S Lipo Battery，Life, Lilon, LiHv/Pb/NiMH Battery - XT60 : Toys & Games
Camera/VTX: Amazon.com: AKK KC03 2.8MM 120 Degree 800TVL NTSC Switchable Camera with 600mW FPV Transmitter : Toys & Games
Headset: Amazon.com: 5.8G FPV Goggles with Antennas: 3 Inch Screen 5.8G 40CH Build in Battery Video Headset for Analog FPV camera and Transmitter FPV Drone RC Car Airplane RC Hobbies by Speedybee : Toys & Games
Hardware: 12mm m3 (x24), m3 nuts (x4), 8mm m4 (x16), Velcro strip, double sided tape or m2 screws and nuts
CF PETG - 200g
Print Settings: 3 walls, 35% infill, supports on for prop guards and landing gear base.