STRYFE - 3D Printed 5" Optimized Topology Drone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printed Drone Frame (Designed to be printable on smaller 3D printers). Inspired by ProgrammaDan's Dragonfly FPV Drone
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
TEST FLIGHT: https://youtube.com/shorts/oiSVrfM4jPY?si=SMwh-cmVWzysh2-i
A drone I designed using Fusion 360's Generative design tools.
Instructions:
Screw the bottom onto each arm - 8x m4 screws
Screw in the camera to the camera mount - 2x m2 screws
Screw in the camera to the frame - 2x m3 screws
Screw in the FC stack - 4x m3
Thread wires through arms - 4x
Screw in motors, prop guards, landing gear
Solder in wires - motors, VTX, ELRS, power, capacitor (I had to cut some of them down to fit better, I followed the amazon listings for the wiring)
Thread the Velcro strip through the top 2 slits
Screw on the top - 8x m4 screws, 2x m3 screws
Test the motors using BetaFlight (direction and order)
Configure BetaFlight
Strap in battery
Start Flying!
BOM - These were the cheapest parts I could find:
FC/ESC stack: Amazon.com: SoloGood F405 55A FPV Stack ICM42688P F405 Flight Controller BLHELI_S 55A 4in1 ESC 30.5X30.5mm 2-6S for FPV Freestyle Drones Parts : Industrial & Scientific
Motors: MAD BSC 2207.5 1750KV 1950KV 2100KV FPV Motor for 5 inch FPV Drone, N52H Magnets, Compatible with 6S LiPo for Racing and Freestyle (2100KV) - Amazon.com
Props: Amazon.com: 8pcs HQProp 5X4.8X3 V1S 5048 5 Inch 3-Blade Propellers Set (4X CW / 4X CCW) Poly Carbonate (Black) : Toys & Games
Batteries: Amazon.com: OVONIC 14.8V 120C 1500mAh 4S Lipo Battery Battery with XT60 Plug for FPV Drone Quadcopter Helicopter Airplane RC Boat RC Car RC Models(2 Pack) : Toys & Games
ELRS/Remote Control: https://www.amazon.com/dp/B0FJFL51RV?ref=ppx_yo2ov_dt_b_fed_asin_title
Charger: Amazon.com: ISDT PD60S XT60 Connector 60W 6A Battery Balance Charger Type-C Input for 1-4S Lipo Battery，Life, Lilon, LiHv/Pb/NiMH Battery - XT60 : Toys & Games
Camera/VTX: Amazon.com: AKK KC03 2.8MM 120 Degree 800TVL NTSC Switchable Camera with 600mW FPV Transmitter : Toys & Games
Headset: Amazon.com: 5.8G FPV Goggles with Antennas: 3 Inch Screen 5.8G 40CH Build in Battery Video Headset for Analog FPV camera and Transmitter FPV Drone RC Car Airplane RC Hobbies by Speedybee : Toys & Games
Hardware: 12mm m3 (x24), m3 nuts (x4), 8mm m4 (x16), Velcro strip, double sided tape or m2 screws and nuts
CF PETG - 200g
Print Settings: 3 walls, 35% infill, supports on for prop guards and landing gear base.