Aircon duct connector and flange - 125mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An aircon duct connector for threaded 125mm aircon pipes and flanges to mount the connector to a board.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a connector for threaded 125mm aircon outlets and flanges to mount it all to a board which can be placed in the window frame as a seal.
I printed it in white PLA but if this proves to not be heat resistent enough, I might have to reprint it in PETG or so.
The screws are intended to be M4 pan head screws (probably 20mm or 25mm, depending on the thickness of your board) with an internal hex head. You will need a washer and a nut on the outside.
Note: There are two connector pipes.
One is short and easy to print but has no angle to lead the pipe down nicely.
The other is larger and angled to allow the pipe to lead to the aircon more nicely.