1 / 4
Exhaust tube quick adaptator (100mm - 75mm)+parametrics diameter — zdjęcie 1
1 / 4

Exhaust tube quick adaptator (100mm - 75mm)+parametrics diameter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

quick adaptator for two different size adaptator (laser cut in my case)

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

I bought a fume extractor from vevor for my lasercutter xtool s1, i wanted a quick switch adaptator to swap between the lasercutter and electronic solder fume extractor. The tube of my xtool is 75mm and 100mm for the fume extractor in my case.

PLA PETG ABS ASA ETC... should do the trick i did it in petg.

4 layers wall 20% infill seems perfect.

the design (by design) contain some play between parts, so make you a little gasket that can fit between the two hose adaptator, something like 2mm could be pefect.

Thing that need to be improve : 

  • gasket line

  • gasket

  • hing lock bolt

  • quick release bolt

The way it is, it's working proprely, i dont feel any leaks around hoses and adaptator or anything. 

IF YOU WANNA CHANGE THE SIZE OF THE TUBE it could be easy if you have fusion360 and if you find the :

  • SKETCH 12 _ SMALL TUBE SIZE

  • SKETCH 14 _ BIG TUBE SIZE

every modification will be change with those two tube sizes but : MAXIMUM SIZE 100MM (the lock is made around this max size)

hope it will be usefull for somebody ;-)

next thing to do, a stand to use the tube when i'm making electronic soldering with this lead based tin that i'm sniffing sins years... and a activ charcoal for aquariums filter for the exhaust of my fume extractor to get zero smells at the output with the same actual system.

Tagi