1 / 1
Allen keys / Imbus holder for Lidl PARKSIDE pegboard (simplified version) — zdjęcie 1

Allen keys / Imbus holder for Lidl PARKSIDE pegboard (simplified version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simplified, numberless 3-pin Allen key holder for Parkside pegboards, half the original height. Prints in 1h 15m.

Ocena
0 / 5
Polubienia
16
Pobrania
67
Wydruki
0
Wyświetlenia
208
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

🛠 Allen keys / Imbus holder for Lidl PARKSIDE pegboard (simplified version)

This is a simplified, sleek remix of the Allen key holder, specifically redesigned for the Parkside/Lidl plastic pegboard system.

The original design is great, but I wanted something more minimalist, faster to print, and material-efficient for my workshop setup. Using direct CAD modeling, I modified the original model with several functional improvements:

  • Half the Height: The vertical profile was cut in half, significantly reducing material use while still providing rock-solid stability for the keys.

  • Clean Front Face: I completely removed the embossed numbers from the front for a smooth, clean, and minimalist look.

  • 3-Pin Mounting System: Optimized to use exactly 3 mounting pins, which is the perfect sweet spot for a strong hold on the Parkside board without unnecessary friction during installation.

⚙ Print Settings

  • Orientation: Print it upright, flat on its base.

  • Infill: 5% to 10% Rectilinear works perfectly and keeps the print light yet sturdy enough for a full set of heavy keys.

  • Supports: I highly recommend using organic supports for the mounting pins to ensure they print perfectly clean and fit smoothly into the pegboard holes. If the pins feel a bit too snug, a very light sanding will make them slide right in.

  • Material: PLA / PETG

  • Print Time: Around 1 hour and 15 minutes (depending on your specific printer speed and layer height profiles).

I have included single file and a single file with pre-set helper-plates.

Hope it will be helpfull and Happy printing! 🖨🍀

Tagi