oil injector for lego vacuum turbines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an oil injector to use on vacuum turbines to add oil without disassembly
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
i used the legos brick model and added modifications through blender like a tube and others so you can use it for automatically putting oil on it without dissasembling the turbine.
note: this was designed mainly for 8x6 for outside size and 6x4 chamber size. it could possibly work in other sizes but height may be a problem and also it depends on the turbine you use and the placement of the brick.
instructions: put it on your vacuum turbine on both sides and pour oil in the funnel. ensure the output oil is not blocked by the shaft of the turbine and is located at the blades. make sure that it flows properly by blowing in to the funnel after printing, if ur not sure try pouring water or oil in without the turbine. if it doesnt fit well with bricks adjust xy contour compensation. make sure to put the cap on after putting oil in inorder to max performance