Travel holder for monitors, ipads, phones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After couple of tests I was able to create a fully printable adjustable holder. All parts can be printed.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
After couple of tests I was able to create a fully printable adjustable holder. All parts can be printed and put together.
I suggest to print all flat with support because is faster and brim if necessary (not sticking on plate). If you want more resistance, the central piece can be printed vertical instead.
If you need little force to adjust the holder, I suggest you to increase friction in the mechanical coupling area (center piece and the main piece). You can achieve this with coarse sandpaper probably or adding a sort of glue/sticky substance in between.
At the time I'm writing this, the 3 holders I printed can easily handle a 15.6 portable monitor, ipad, phone and kobo reader. I also assume that depends on the type of material you are using.
I used PLA+ from an unknown Chinese producer, so please consider that.
