Asus Prime 9070xt GPU Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
gpu support for the Asus Prime 9070xt. 136mm to center of M3 screw holes
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Although i measured 28mm oc from screw hole to screw hole when i printed it it was ever so slightly too small but starting with the middle screw allowed me to screw in the two on the sides without issue.
I printed with PLA but the front intake fans are directly blowing on the print and i have great cooling in my case overall so it shouldnt reach 60 degrees but maybe choose a different material if needed.
since your case will vary to mine i included the fcstd file for FreeCHADS so it can be modified. ignore my garbage constraints this is my first model
let me know if it works with any other model of gpu so i can edit it for searchability