Kenwood TH-D75 Speaker-mic Retaining Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Retaining clip to hold in place a Kenwood speaker-mic double-L connector.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- BSD License
The famous double-L connector used by so many radios has a tendency to come loose. On some radios this can cause pinning of the PTT contacts and a stuck mic.
This radio does not have any kind of retention for the connector so I modeled and printed this clip. The clip slides on to the double L and then snaps in place under the belt clip.
I have printed it with various settings including the following...
material: PLA or PLA-CF
height: .12 or .2
infill: 15% or 100%
Printer: Creality K2 Pro with .4mm nozzle
It doesn't need support if you auto-orient the print which prints it upside down. I can't see any significant difference in strength between the various settings, but I personally think look and feel is more like a finished product when printed at .12 and 100%.