Kenwood TH-D75 Speaker-mic Retaining Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Retaining clip to hold in place a Kenwood speaker-mic double-L connector.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- BSD License
The famous double-L connector used by so many radios has a tendency to come loose. On some radios this can cause pinning of the PTT contacts and a stuck mic.
This radio does not have any kind of retention for the connector so I modeled and printed this clip. The clip slides on to the double L and then snaps in place under the belt clip.
I have printed it with various settings including the following...
material: PLA or PLA-CF
height: .12 or .2
infill: 15% or 100%
Printer: Creality K2 Pro with .4mm nozzle
It doesn't need support if you auto-orient the print which prints it upside down. I can't see any significant difference in strength between the various settings, but I personally think look and feel is more like a finished product when printed at .12 and 100%.