ATOMRC Beluga - DJI O3 Pan Servo Camera Mount

This design allows you to position the DJI O3 perfectly on the canopy plate, providing an expansive, wide-angle front view with only minimal prop visibility at the edges. Integrated with a 9g PAN servo slot, it delivers a massive 270° of camera deflection, allowing you to easily look back and check your own tail on both sides mid-flight!

Key features

Integrated Pan Servo: Added a dedicated 9g servo placeholder (optimised for 270° servos for maximum field of view).

Enhanced Thermal Performance: Improved internal airflow channels to keep the DJI O3 Air Unit cool.

Perfect Alignment: The base is designed to perfectly match the ATOMRC Beluga’s bottom canopy plate hole layout.

Hardware & Bill of Materials (BOM)

Magnets: 4x Neodymium magnets ($5 \times 5 \times 5\text{ mm}$), designed for a snug press-fit.

Servo: 1x 9g Servo (270° deflection recommended).

Adhesive: Strong double-sided tape to secure the base.

Recommended Print Settings

Material: PLA works great (or PETG/TPU if you prefer extra durability).

Infill: 20% is more than sufficient.

Supports: Required for the top part only.

🔧 Assembly Instructions

Prep the Base: Secure the base to the canopy plate using screws or double-sided tape. The alignment holes will ensure it sits perfectly.

Install Magnets: Press-fit the four 5x5x5mm  magnets into their designated slots (ensure your polarities match up!).

Mount the Electronics: Fit the DJI O3 Air Unit into the cavity between the top and bottom parts. The camera cable routes easily through the dedicated slot, and the antenna clips securely into place.

Snap & Fly: Let the top and bottom assemblies magnetically snap together, and you're ready for takeoff!
Allows for quick removal in case you don't want you cam during flight (for your mayden flight for example :) )

If you fly this mount, please share your makes and thoughts in the comments! Happy flying!