Wiser Drayton Schneider Radiator Valve M28x1.5 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D printable adapter allows a Drayton Wiser / Schneider Electric Smart Radiator Thermostat (Smart TRV) to be fitted
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wiser Drayton / Schneider Smart TRV to M28 x 1.5 Adapter
Overview
This adapter has been designed to allow a Drayton Wiser / Schneider Electric Smart Radiator Thermostat (Smart TRV Head) to be fitted directly to radiator valves using an M28 x 1.5 mm threaded connection, commonly found on certain COMAP and other European thermostatic radiator valve bodies.
Unlike some commercial adapters, this design reuses the original metal M28 x 1.5 retaining ring from an existing radiator valve head. The metal ring is removed from a redundant thermostatic valve head and permanently incorporated into the printed adapter, providing a robust threaded connection while avoiding the challenges associated with printing fine M28 x 1.5 threads.
Design Features
Direct compatibility with Drayton Wiser / Schneider Smart Radiator Thermostat heads.
Reuses the original metal M28 x 1.5 threaded retaining ring from an existing TRV head.
Suitable for COMAP and other M28 x 1.5 radiator valve bodies.
Eliminates the need to replace the radiator valve body, avoiding system draining and refilling.
Compact and unobtrusive design.
Designed for FDM 3D printing.
Simple installation using readily available recycled components.
Printing Recommendations
The adapter has been successfully printed in PETG using:
0.4 mm nozzle
4 top layers
4 bottom layers
Standard wall settings
Black PETG filament
Particular attention should be paid to the internal spacer section, as this transfers the operating force from the Wiser actuator onto the radiator valve pin. Additional top and bottom layers help increase strength and resistance to long-term deformation.
While PETG appears suitable, long-term performance under elevated temperatures and continuous loading has not yet been fully evaluated. Users may wish to consider printing the adapter in:
ASA
ABS
Polycarbonate blends
Other engineering-grade materials
for improved temperature resistance and creep performance.
Valve Pin Contact Surface
The radiator valve pin bears directly against the printed spacer. To improve long-term durability, future versions may incorporate:
A small machine screw
A metal insert
A coin or metal disc
A heat-set insert
to provide a hardened wear surface and reduce the risk of indentation or deformation over time.
Installation
Remove the original thermostatic head from the radiator valve.
Recover the M28 x 1.5 threaded metal retaining ring from the redundant valve head.
Install the metal ring into the printed adapter.
Fit the adapter onto the radiator valve body.
Attach the Wiser Smart TRV head.
Run the normal Wiser calibration procedure.
Long-Term Testing
Initial testing has been carried out successfully; however, the adapter was designed and printed during the summer months and therefore has not yet undergone a full heating season.
The heating system utilises a weather-compensated boiler connected via OpenTherm to the Wiser heating controller, allowing lower average radiator temperatures during much of the heating season. This may reduce thermal stress on the printed component compared with traditional fixed-flow-temperature systems.
Performance will continue to be monitored during winter operation to assess:
Dimensional stability
Material creep
Spacer wear
Long-term reliability of the recycled metal retaining ring interface
If you want to design your own, the thread on the Wiser Radiator valve is a 1/2" NPT / ANSI thread.
The standard wiser thread is an M30x1.5, just in case you were wondering.
files were designed in FreeCAD and the freeCAD file is provided for you too.
Disclaimer
This is an independently designed aftermarket adapter and is not affiliated with, endorsed by, or approved by Drayton, Schneider Electric, COMAP, or any other manufacturer. Users should ensure suitability for their own installation and inspect printed components regularly for wear or damage.
