1 / 5
MS Energy Urban 500 Electric Scooter Turn Signal — zdjęcie 1
1 / 5

MS Energy Urban 500 Electric Scooter Turn Signal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you are the owner of MS Energy Urban 500 electric scooter, then you probably have one or both turn signal covers brok

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you are the owner of MS Energy Urban 500 electric scooter, then you probably have one or both turn signal covers broken  as they are made of plastic, unprotected and one scooter fall is enough to break it.

On one of the photos you can see comparison with the original part.

 

Of course, you need transparent filament but that shouldn't be a problem.

As I'm new with printing in transparent, this (on photos) is as transparent I could get with 0.4mm nozzle. Will practice more :) …but even the original part is not fully transparent. Even so, on one of the photos I attached you can see that it is clear enough to provide bright light.

Print profile includes supports that are quite easy to remove, and printing is around 45min.

 

Hopefully this fits other models as well (let me know in comments).

 

Yes, you could probably order onefrom the manufacturer, rather cheap I suppose, but - it will get broken again :)

Tagi