Dell OEM/Alienware RTX 3090 Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a full mounting plate for a pair of 120mm fans.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a full plate to mount the fans with screws as the card is running on a Bee-link EX Pro. Connecting with just zip-ties seemed messy. I used a pair of Noctua NF-A12x25 PWM fans. The existing shroud screws are way to short, replace with 2mm x 6mm - 8mm screws. I used hex head screws.
One fan screw can not be inserted as the rail partially covers it. The fan is plenty secure with 3 screws. Adding the SCAD in case anyone wants to alter more.
PETG (heat tolerant near GPU)
Layer height: 0.2mm
Infill: 40% gyroid
Walls: 4 perimeters
fan plate face down on bed, arms pointing up — no supports needed although I did use supports to avoid any stringing on the cross bars. On bed-only should work.