Dell OEM/Alienware RTX 3090 Mounting Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a full mounting plate for a pair of 120mm fans.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I wanted a full plate to mount the fans with screws as the card is running on a Bee-link EX Pro. Connecting with just zip-ties seemed messy. I used a pair of Noctua NF-A12x25 PWM fans. The existing shroud screws are way to short, replace with 2mm x 6mm - 8mm screws. I used hex head screws.
One fan screw can not be inserted as the rail partially covers it. The fan is plenty secure with 3 screws. Adding the SCAD in case anyone wants to alter more.
PETG (heat tolerant near GPU)
Layer height: 0.2mm
Infill: 40% gyroid
Walls: 4 perimeters
fan plate face down on bed, arms pointing up — no supports needed although I did use supports to avoid any stringing on the cross bars. On bed-only should work.