Adafruit RP2040 Feather Minimal Case (HID Remapper)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile, minimal case for the Adafruit RP2040 Feather board that's used for the HID remapper.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
This is a low profile, minimal case for the Adafruit RP2040 Feather board that's used for the HID remapper. It includes a reset & boot button extender to the top lid.
There is also a small hole on the side for a mini flathead screwdriver to forcibly remove the top, if the board needs to be removed from the unit. However, the snap-fit clasps are very fragile, and this is not meant to be used as a means to open & close the case frequently.
RP2040 on Adafruit: https://www.adafruit.com/product/5723
HID Remapper: https://github.com/jfedor2/hid-remapper
Edit (6/10/26): I've updated the model to have thicker walls, larger button pads, and a mounting mechanism that uses M2 screws and M2 heat-set inserts to keep the board stable. If you would like to use the screwless friction-fit design, use the old design in the "v1" category. The new one is a much sturdier, higher quality case, however.