Liczymy pasujące modele…
I liked design8studio's open featherboard model, but it was just a little too big for the Prusa Mini build plate. So I trimmed the back off of it while keeping the fingers the same. I also reduced the thickness of it in a few areas to try…
Wydruk około 5,90 €–7,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Feathers Artwork Prints without supports and can be scaled up or down within reason. In the picture it is printed in Sovol Silk Purple Rainbow which I think makes it look rather Peacock like. :) Filament link: https://amzn.to/3O5qJcI
The Feather Bloom Vase is a delicate fusion of organic beauty and refined artistry. Inspired by the soft curves and intricate texture of a feather, this vase exudes lightness and sophistication. The elegant relief design brings a sense of…
I gathered several ideas from the net and added variable feathers to the concept as well as a modified track bar for the BOSCH GTS10XC table saw. The distance of the feathers to the saw blade is given by rotating the board around its…
Heyho here I have a featherboard for your Festool TKS80. It will slide into the existing profile of the angle guide. There are different options: small_thin = small featherboard with 2 perimeter feathers small_big = small featherboard…
This is a stand for housing a Tripler FeatherWing. The PCB is secured with M2.5 nylon hardware. Useful for propping up and displaying Adafruit Feather boards. Tripler FeatherWing features three breakouts for each pin on a Feather, as well…
A super light (around of activation force 10g) switch for use with Assistive Technology. Utilizes the really sturdy Omron A22NZ-S-G1A contact block for reliability, sturdiness and solder free installation. This normally has an activation…
For Aggressive Inline Skating. H-blocks are compatible with 60mm HD2, 72mm HD2, and FLT4 (Featherlite) frames by Ground Control. I couldn't find anywhere to buy the HBlock only, so I made my own. Print in PLA+ or better (PA, Glass filled…
Here's a case that works with the Feather-compatible Argon and Xenon (Boron compatibility hasn't been tested). Argon: There is a cutout in the back of the case for the Argon's Wifi antenna (fish it through and connect before enclosing).…
This can hold an adafruit feather or featherwing neatly on top of the stacking headers to make it easier to solder.
Just a fun little mobile. The sizes of the feathers and the length of the rod are designed so that the tips of the middle feathers barely touch the soles. You can see the assembly diagram in the fourth picture. The feathers on each level…
About I've got two Adafruit ESP32-S3 Reverse TFT Feather and without any enclosure or stand it is a bit inconvenient to use them, especially if you have a lot of other tools on the messy table :D Thus I mixed gridfinity bin 1x2x2 from the…
The Feather Bloom Vase is a delicate fusion of organic beauty and refined artistry. Inspired by the soft curves and intricate texture of a feather, this vase exudes lightness and sophistication. The elegant relief design brings a sense of…
This is the worst villain on west wallaby street that I made using makerworld and it is based off of the Funko Pop version of Feathers Mcgraw This is the generator Powered by Image-to-3D from MakerWorld…
This is a remix. I have been using the original featherboard for a while now on my tablesaw and bandsaw. It has a few teeth missing from the comb and some damage from the circular saw blade while using the featherboard in the vertical…
Capture the stunning beauty of this majestic bird with this 3D printable STL model of a Cute Peacock Displaying Feathers. This eye-catching figure is perfect for adding a touch of exotic elegance and vibrant color to your displays or…
Round Leaf Feather Candle Holder – Elegant Decorative Design This round candle holder features beautifully detailed side walls shaped like leaves/feathers arranged in a full circle, creating a natural and elegant look. Printed using gold…
🐦 Cute Little Bird – FEATHER (cartoon, noAMS) Meet FEATHER – an adorable cartoon‑style bird with big expressive eyes, a round chubby body, a cheerful beak, and playful tail feathers. His friendly expression and colorful design make him a…
Project: Feather McGraw Earring 2.hfp Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 196.41x240mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max…
A simple featherboard I made to fit a magnetic base so it can quickly be positioned on my bandsaw table. It fits two different brands of magnetic base that I have, but yours might differ a bit in dimensions so I've included the STEP file…
This is a simple desk stand and battery holder for my HUZZAH Feather ESP8266 + Adafruit NeoPixel FeatherWing 4x8 (NeoMatrix) scrolling text sign. It includes a holder sized for a PKCELL LP503035 LiPo battery (3.4V, 500mAh) so the sign can…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
This is my first design. It is a minimalistic yet useful robust and lightweight paper cutter, it has a retractable blade that can be locked opened or closed thanks to a compliant spring that pushes the latch upwards and it uses the…
If you downloaded the model, it means you liked it! If you like it, put a like mark!😜😜😜
A unique 3D printable creation — this Articulated Axolotl, Print in Place, Ball Socket Joints, Feathery Gills, Cute Salamander Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ…
This Thunder Chief Bust portrays a powerful tribal leader believed to command the power of storms. Wearing an impressive feathered headdress and ceremonial armour carved with symbolic markings, the chief stands as both warrior and…
This model is compatible with the lego system.
This model is compatible with the lego system.
Needs 2 hold down knows on M6 Bolts. Hold Down Knobs Here. https://www.printables.com/model/210965-holddown-knob
This is my revised december 2023 version of the feather river LDS temple. I am offering this one totally free. You can support future development and revisions of this free model by purchasing the original version @…
My Feather M0 has headers on the bottom, remixed the feather box to increase the depth, screw holes and usb opening.
What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…
Box to house the Adafruit HUZZAH32, a Adafruit FeatherWing OLED and a PIR sensor
This model is compatible with the lego system.
just glue two halfs togehter and set them in place
Die Verwendung der Funkmodule erfolgt auf eigenes rechtliches Risiko !! Feather Fona: https://www.exp-tech.de/module/wireless/gsmgprs/6928/adafruit-feather-32u4-fona Nextion Display:…
Quick little friday night project on the most feared Fowl out there. Resin printed -SJBuilds 2024
Feathers (or fish scales?) for glueing in a pattern for a bird costume. I made these for an Anna's Hummingbird Halloween costume - if I go through with it, I'll post photos of the costume with these "feathers." I'm posting this model…
Print with the front of the display flat on the print surface. Mount the featherwing with 4 M2.5 screws & nuts. The version shown above was sliced with orcaslicer and printed on an MK3s in Prusament Mystic Brown on a hologram build plate…
Model vytvořený pro soutěž Jeden extruder - dvě barvy. Snažila jsem se o model, který by byl tištěný s minimem podpěr. Z tohoto důvodu jsem vytvořila samostatnou podložku pro mozaiku pavího pera, která se vkládá do stěn krabičky. Podpěry…
A simple stand for the LoRa Msg design from https://www.printables.com/model/66291-lora-msg I recommend using some little rubber feet like these for non-slip operation.
This is a very small box for the Adafruit Feather micro controllers. if you dont need space for a lot of electronics, this might be all you need. Hardware: M3 Flat head M2.6x5 button For mounting, There are 2 M3 countersunk holes in the…
This is a remix of https://www.thingiverse.com/thing:2610621 that allows you to mount Adafruit Feather boards to a din rail.
This is a basic key shaped holder for the standard size Featherweight magnet. It is used with the mag switch included in some of their designs, or in the seperate mag switch itself. It is sized for the magnet to fit firmly inside the key,…
This model is compatible with the lego system.
This can hold an adafruit feather or featherwing neatly on top of the stacking headers to make it easier to solder.
Feather board with replaceable teeth. The teeth are made of TPU and the hardness can be changed by adjusting the filling density. A tooth with bearing is added for conversion to Thin Rip Table Saw Jig.
This is a Dream Catcher with 3 feathers. I made it a couple of different layers for a color change. my other Dream Catcher can be found at https://www.thingiverse.com/thing:2499624 Print instructions Category: Art
Insert for game Flock Together: Birds of a Feather Eggspansion (base game + expansion) I present to you the insert for the game Flock Together + Birds of a Feather Eggspansion. Everything fits in one box. Take advantage of this and print…
This stunning dragon with feather-like blue wings and a fiery orange body will add color and charm to your collections!
Keyrambit is a multifunctional keychain that combines practicality with fun. Featuring an ergonomic grip and sturdy carabiner, Keyrambit makes it easy to carry keys and can be used as an anti-stress fidget spinner. 6803 Bearing: Keyrambit…
Added 2 models: 1. Pure model - if someone want to change original 2. Model with build in supports - for the print Used one standard magnet 3x6 mm
Modeled to replicate the same width and general dimensions of the featherboard that came with my SawStop PCS, but with lesser depth for a more compact accessory. I use these primarily with a table saw picture frame miter jig. Hold-down…
When installing 100mm or 125mm (4"- 5") featheredge/closeboard panels this spacer will give you the required 25mm overlap between panels. Category: Tools
Inspired by featherboards we can find on the market, I designed my own adapted to my need and the bed size of my MINI+ (180mmx180mm) I designed it using Fusion 360. Model includes T-nuts and knobs for M6 and M8 screws to fix it on the…
Intended to be mounted in a nosecone with a 1/4-20 threaded rod running from the nosecone tip to the bulkhead. Needs 2 M3 heat set inserts. Recommend to use PETG.
This my take on a table saw feather board. The feather board has rounded corners on the fingers to help reduce stress concentration and give an overall softer feel to the feather board. I also added my logo to the feather board, but the…
Replacement for wobbling cat toy with long feather wand. Heating the end of the thin rod where the feather is mounting and pressing it into the top center of the part helps it to stay secure.
use black filament for the code if you would like a great finish
Just a fun little mobile. The sizes of the feathers and the length of the rod are designed so that the tips of the middle feathers barely touch the soles. You can see the assembly diagram in the fourth picture. The feathers on each level…
About I've got two Adafruit ESP32-S3 Reverse TFT Feather and without any enclosure or stand it is a bit inconvenient to use them, especially if you have a lot of other tools on the messy table :D Thus I mixed gridfinity bin 1x2x2 from the…
Adapted RailHolder and Slide for Rigid TS3650 10" table saw with miter fence. The original model I found and printed had the wrong channel size, so I had to create this one to match the channel on my fence. Use two of the 6mm knobs for…
Feather key for the Festool MFT. For example as a stop for fas MFT accessories. Needed hardware: thread insert, grub screw. Print recommendations: PETG, Infill 100% Festool Passfeder PASSFEDER BASIS 5 14X9X36 (Teilenummer 437377) Festool…
Miter Slides to attach accessories like featherboards to a Ryobi RT102 router table. Fits 6mm bolts. I used 40mm bolts with the featherboard an knobs I printed. Since this isn't a t-slot, I used a clamp for a bit of extra sbility to clamp…
The Heart & Feather Vase is a stunning blend of romance and elegance, perfect for adding a touch of passion to any space. Featuring a bold red cylindrical body, the vase is adorned with a raised heart and a delicate feather motif,…
feather wall STL file fixed Divided into 5 parts for error-free printing Transactions were made without LEDs IF YOU WANT THE LED VERSION, PLEASE CONTACT US
Something my daughter made in Tinkercad. She also took the pictures herself. Supports highly advised. Don't worry about the random c-shaped plane, when it prints it won't show up. Credits to @EnkiiPrints for the cat tail, you can find the…
The items are 500% scale of the original “penguin”. (Headsize 9mm) The glove fits onto Feather's head and can be removed (Requires support during printing), The model needs to be glued to the base.
Really liked StuffIMade's feather board, but didn't want to pay for the Bow Products fingers. So I remixed scaryPug's experimental fingers to work together. Print Settings: 95A TPU 3 walls 35% gyroid infill
Printed at .2 layer with .4 nozzle with 5 layers per wall. I used PETG for flexibility but PLA may work and PLA plus should be good. I printed 1 at 15 percent infill and it worked fine, I also printed one at 25 percent and it felt nice…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A simple case with a snap fit lid designed around Adafruit HUZZAH32 ESP32 v2 + Featherwing 2.4 V2. Print in two pieces without supports. Case has standoffs to screw down the board, but I found the PCB stays in well enough without needing…
Can use string to tie them. Very nice model, props to the creators for the models that I refined.
A modified version of the Wallace and Gromit Feather McGraw statue originally modeled by @JWcph, with colorings for MMU3 (pink, white, black, orange, and another for eyes needed)
I needed a featherboard with more reach for my router table, so I designed this one.
This is the worst villain on west wallaby street that I made using makerworld and it is based off of the Funko Pop version of Feathers Mcgraw This is the generator Powered by Image-to-3D from MakerWorld…
Feather daggers for Xayah from League of Legends, they can be printed in a variety of sizes to get a few different one for a cosplay. I recommend printing them separately as it is much easier to paint the handle when it is a separate piece.
A 65mm x 20mm enclosure to fit an Adafruit Feather. It has a space to run a NeoPixel strip around the outside with a printed diffuser. The hexagonal button top fits a 6mmx6mm tactile button with a 3mm stem. The hex button top is inserted…
Caja de Pluma de Pavo Real, para varios usos - Peacock Feather Box, for various uses. Parámetros de impresión Material: PLA Altura de Capa: 0.12mm Temperatura: 200°C Temperatura de cama de impresión: 60°C Relleno: 20% Soportes: No…
Atlanta Braves Retro Feather Oversized Necklace Logo that I designed. I hope you enjoy!
This is a 0.8 MOD gear 60T & 65T for the 2.5" & 3" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing…
This is a 0.8 MOD gear 60T for the 2" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or…
I think the model name says it all just snap it on and slide the attachment in and you're done.
Screwable Canister for pencils, brushes, feathers etc. With 3 different tube lengths (base & top). Printing I printed with PLA, layer height 0.2 mm. Assembly Just screw the two parts together.
Video: Guide: https://learn.adafruit.com/feather-tft-stemma-case 3D print a Stemma case for the Adafruit TFT Feather with ESP32-S2. TFT Feather ESP32-S2 https://www.adafruit.com/product/5300 BMP280 Stemma QT…
Bird Masquerade Mask with Feathers and Beak, by Perihelion Prints. Ready to print and wear or display. ====== This masquerade mask, with avian touches like feathers and a beak, is perfect for a masquerade party, Mardi Gras celebration, or…
A special order for a performer friend. Inspired by many other designs we've seen in real life. Many holes for mounting feathers with some wire, one big hole for joining several staves together with a bolt, and an additional hole for a…
THIS PROJECT IS DISCONTINUED, REMIX AS YOU WANT TO IMPROVE IT ALSO BE SURE TO CHECK OUT MY NEW PROJECT CALLED THE VENSAR LINKED BELOW Notes: If you see any problems with the model that may interfere with actual usage, please let me know…
I needed a reference model for a project I was working on. Sharing it here for anyone else that might need it. NOTE : This is not an official Adafruit model. Positions and sizes of the components are not precise. It should be a good…
This model is compatible with the lego system.
Welcome to my first upload! This variable-pitch propeller was inspired by a comment from my grandad while we were building a rubber band-powered Spitfire (1/20 scale – specifically this one: Sky High RC Spitfire XIV Kit ). He wondered…
A way to mount a Adafruit Power Relay FeatherWing to extruded aluminum. I used it to trigger my 24v lights on my printer via octoprint.
