brk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
brk -- a minimal, low-profile molle-mounted magazine holder for talon-style magazines.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
brk is a minimal talon magazine holder for foam-flinging hobbyists. designed to be highly secure and stable when running, brk uses ball detents to secure magazines in place by the notch on the side of the magazine. Designed to take up as little horizontal space as possible, you should be able to fit one brk between two standard molle PALS pad.
Hardware:
3 6x7mm ball detents, like these
8 M3 heat set inserts
8 M3x8mm socket-head screws
Optional: superglue for the ball detents (these are a precise friction fit, and should not come out once mounted)
Assembly
After printing, set your heat set inserts into the 8 cutouts on the back of the brk.
using a flat metal tool like a wrench for leverage, push the ball detents into place. You can add a drop of glue beforehand, but be careful to use as little as possible, as spillage may seep into the detent itself. You shouldn't need to glue them in place, as the fit is extremely tight.
Thread your brackets through two adjacent PALS loops.
Secure your brk to the PALS by screwing in all 8 screws.