Gridfinity Warrior Security Bit Security Torx Holder (Harbor Freight 68459)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact 3U Gridfinity designed for the WARRIOR Security Bit Set (68459/93388), specifically the security torx bits.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed from the ground up for clean, durable toolbox organization using the Gridfinity system.
This model was inspired by the excellent tool organization work of RobNordic, but every dimension, fitment, and feature in this design was created independently from scratch around my own tools and workflow.
Features:
Standard 3U Gridfinity height
1x2 Gridfinity footprint
Stackable Gridfinity-compatible lips
Magnet-free design
Designed for real-world toolbox use
1mm text height for title and labels
Socket sizes labeled for quick identification
I specifically chose a no-magnet approach to keep printing simple, reduce hardware costs, and make the organizers easy to move, remix, and reprint.
This holder is designed for the WARRIOR Security Bit Set (SKU 68459 / 93388), specifically the Security Torx bits including:
T8
T10
T15
T20
T25
T27
T30
T35
T40
I broke the original bit set into smaller dedicated organizers to make the bits easier to identify, access, and integrate into a Gridfinity toolbox system
A little background on the project:
I’m still very early in my 3D modeling journey, and this collection has been a huge learning experience for me. All of these models were designed on an iPad using the free version of Shapr3D. Because of the limitations of the free version, I unfortunately can’t currently export STEP files; though I’m hoping to upgrade in the future as I continue building out this ecosystem.
Even so, I’ve put a lot of time into making these organizers practical, printable, and consistent across the collection.
Printing Notes:
Prints great in PLA or PETG
No supports or brim required
0.2 mm layer height recommended
3–4 walls recommended for durability
Lightning 10% infill to save time and filament
If you print one, I’d love to see your setup and remixes. I’m building out a full matching tool organization ecosystem with consistent sizing and styling across the entire collection.