Ford ML3Z-17A703-AA / AB 360 Camera Mirror Housing Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the part under the mirror that is a housing/cover for the mirror/360 camera electronics
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After some neanderthal sideswiped my F-150, this piece broke off my truck's mirror/360 camera. The replacement piece of plastic was >$70, so I wasted far too much time recreating a pretty-close replacement - it's not perfect, until you help me make it perfect!
Things I learned:
In Fusion 360, you can inject a previous version of your model as a derived body to compare/contrast easier. Just "save" the model as something else first.
Print different sub-parts/sections of the model (e.g. in my case, cut just the base) until you nail that profile perfectly. A lot faster iteration that way.
Maybe consider a 3D scanning service or tool if you don't want to waste endless hours on something like this. Or just hurt and spend the $70+ on a piece of plastic.
Hopefully this helps someone else, lessons or part itself!
Printing/ finishing
Printed in PolyLite ASA
It took some dialing in of the cooling to get some of the angles not to sag. They're still a little off but close enough
I printed it on the flat "cut off" end around the base made for that purpose. 3MF included for reference.
Variable layer height was used with tree hybrid supports.
Post-processing (e.g. acetone smoothing) might lead to a better finished product that matches the existing plastic. I didn't do this because I was tired of taking the piece off and I was a little afraid it'd mess up the hooks.