Ford ML3Z-17A703-AA / AB 360 Camera Mirror Housing Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the part under the mirror that is a housing/cover for the mirror/360 camera electronics
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After some neanderthal sideswiped my F-150, this piece broke off my truck's mirror/360 camera. The replacement piece of plastic was >$70, so I wasted far too much time recreating a pretty-close replacement - it's not perfect, until you help me make it perfect!
Things I learned:
In Fusion 360, you can inject a previous version of your model as a derived body to compare/contrast easier. Just "save" the model as something else first.
Print different sub-parts/sections of the model (e.g. in my case, cut just the base) until you nail that profile perfectly. A lot faster iteration that way.
Maybe consider a 3D scanning service or tool if you don't want to waste endless hours on something like this. Or just hurt and spend the $70+ on a piece of plastic.
Hopefully this helps someone else, lessons or part itself!
Printing/ finishing
Printed in PolyLite ASA
It took some dialing in of the cooling to get some of the angles not to sag. They're still a little off but close enough
I printed it on the flat "cut off" end around the base made for that purpose. 3MF included for reference.
Variable layer height was used with tree hybrid supports.
Post-processing (e.g. acetone smoothing) might lead to a better finished product that matches the existing plastic. I didn't do this because I was tired of taking the piece off and I was a little afraid it'd mess up the hooks.