SSUPD Meshroom S V2 5090 Astral Mount/Support Bracket & Case Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and sturdy mount using existing holes in the SSUPD Meshroom S V2 to more securely hold an Asus 5090 Astral
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A simple and sturdy mount using existing holes in the SSUPD Meshroom S V2 to more securely hold an Asus 5090 Astral in the case. The PCIE extender is mounted but using lower mounting points, with the 10mm standoffs and is a slightly angle due to the card IO bracket interfering with the hole at the bottom of the case, but that's where this mount comes in. To secure that IO bracket extending through the bottom of the case.
Due to the IO bracket and whatever cables you plug in sticking out the bottom of the case, I also designed the feet in this repo, to lift the case and also extended (2) DP ports and (1) HDMI port to the back of the case.
There are two versions of the front foot, one for the regular case and one for if you will be using the case front extender from SSUPD. The extender based foot has two holes towards the front of the foot and the intent for those is to drill (2) 3mm holes through the extender and use (2) M3x14-16 screws with M3 lock nuts to further secure everything in place.
I've provided STL and STEP files incase anyone wants to make any changes for their build.
Thank you for you interest in my model and if you do remix it please attribute it appropriately. Thanks!