LayersFactory
Zgłoś model
1 / 8
Sheethead (Voron sheet metal printhead for Monolith gantry) — zdjęcie 1
1 / 8

Sheethead (Voron sheet metal printhead for Monolith gantry)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nicorn

Nicorn

@Nicorn_574492

Minimalistic sheet metal (laser cut) printhead for Voron printers with Monolith gantry

Ocena
0 / 5
Polubienia
21
Pobrania
60
Wydruki
1
Wyświetlenia
766
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Voron Parts & Upgrades
Licencja
Creative Commons — Attribution
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 1) (Komentarze: 8)Remiksy (0)Kolekcje (19)Powiązane

I wanted minimal and easy to laser cut printhead after sheetmetal Monolith gantry installation.

There's Contender hotend in my photos, it has same mounting pattern and full length as Rapido UHF included in STEP file assebmly.

Mounting holes included for extruders: Orbiter 2/2.5, Sherpa micro, VZ Hextrudort.

Post processing after laser cutting required!

You will need to: cut M3 threads, do countersinking for hotend mounting holes and front standoffs' screws.

Ducts included for Rapido UHF and Goliath hotends (please do not forget to "Split to parts" in your slicer). If you need another height - just adjust length of Duct_back and Duct_spacer parts.

Duct Back part has mounting holes (for heat inserts) for ADXL345 board. I use Klicky probe, so just ignore if you use Beacon/Carto probe with integrated ADXL. 

Sheet metal parts weight - 30g approx.
Assembled printhead weight - 270g approx.

It is presumed that you have MGN12 X rail.

Post processing:

  • Red - Countersink for FHCS screws

  • Green - M3 thread (I recommend using Helicoil inserts in aluminum parts, but that's up to you)

Top plate:

Carrier:

Bottom plate:

BOM:

A. Sheet metal laser cut parts:

  1. Top_plate_4mm_1_pc.dxf - 4 mm thick metal, 1 piece

  2. Bottom_plate_4_mm_1_pc.dxf - 4 mm thick metal, 1 piece

  3. Carrier_4mm_1_pc.dxf - 4 mm thick metal, 1 piece

  4. Clamp_4mm_2_pcs.dxf - 4 mm thick metal, 2 pieces

  5. Shim_2mm_1_pc.dxf - 2 mm thick metal, 1 piece

B. Hardware:

  1. M3x5 27 mm long standoff (Alu or Bronze) - 4 pieces

  2. M3x8 BHCS - 4 pieces

  3. M3x10 BHCS - 10 pieces

  4. M3x16 BHCS - 2 pieces

  5. M3x12 FHCS - 2 pieces

  6. M2.5x8 FHCS - 4 pieces (Hotend mount)

  7. M3x25 BHCS - 2 pieces (Rapido UHF duct mount)

  8. M3x32 BHCS - 2 pieces (Goliath duct mount)

  9. M3x5 BHCS - 2 pieces (ADXL mount)

  10. M3x4x5 Heat insert - 2 pieces (ADXL mount)

C. Printed parts:

  • Part cooling duct (according to your hotend)

  • Fan duct for hotend (one option for 2510 fan provided in files)

D. Components

  • Hotend (Rapido UHF, Goliath, CHC XL, etc.)

  • Extruder (Orbiter 2/2.5, Sherpa micro, etc.)

  • CPAP

Tagi

cncprintheadvoronsheetmetalmonolith