Tapo C200C Wall Mount Bracket — 45° Cable Management, Indoor & Outdoor | No Extra Hardware Needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean wall mount bracket for the Tapo C200 camera, designed to hold the camera at a 45° angle.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A clean wall mount bracket for the Tapo C200C camera, designed to hold the camera at a 45° angle to keep the cable naturally out of the way. Mounts using the original hardware included with the camera — no extra purchases required.
Compatible with other Tapo cameras too — if you try it with a different model, let me know in the comments and I'll update the compatibility list.
Mounting: Uses original Tapo screws or any similar size screw. Can be mounted upright or flipped upside down. Mirror the model in your slicer to reverse cable orientation.
Print Settings:
Material: PLA for indoor use. PETG or ASA strongly recommended for outdoor installation
Walls: 3
Infill: 20%
Supports: Yes — required for camera pegs
Layer height: 0.2mm
Notes: The Tapo C200C is a pan-tilt camera so the 45° mount angle doesn't limit coverage. The cable orientation can be reversed by mirroring the STL in your slicer before printing.