Tapo C200C Wall Mount Bracket — 45° Cable Management, Indoor & Outdoor | No Extra Hardware Needed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clean wall mount bracket for the Tapo C200 camera, designed to hold the camera at a 45° angle.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
A clean wall mount bracket for the Tapo C200C camera, designed to hold the camera at a 45° angle to keep the cable naturally out of the way. Mounts using the original hardware included with the camera — no extra purchases required.
Compatible with other Tapo cameras too — if you try it with a different model, let me know in the comments and I'll update the compatibility list.
Mounting: Uses original Tapo screws or any similar size screw. Can be mounted upright or flipped upside down. Mirror the model in your slicer to reverse cable orientation.
Print Settings:
Material: PLA for indoor use. PETG or ASA strongly recommended for outdoor installation
Walls: 3
Infill: 20%
Supports: Yes — required for camera pegs
Layer height: 0.2mm
Notes: The Tapo C200C is a pan-tilt camera so the 45° mount angle doesn't limit coverage. The cable orientation can be reversed by mirroring the STL in your slicer before printing.