1 / 2
Oneway Stronghold Chuck #2 Jaws Tenon Caliper — zdjęcie 1
1 / 2

Oneway Stronghold Chuck #2 Jaws Tenon Caliper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This caliper helps with sizing a tenon when using a Oneway Stronghold Chuck with #2 profiled jaws. On one side is the…

Ocena
0 / 5
Polubienia
4
Pobrania
58
Wydruki
0
Wyświetlenia
355
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This caliper helps with sizing a tenon when using a Oneway Stronghold Chuck with #2 profiled jaws. On one side is the minimum diameter of 1 3/4" and the thickness is 3/16" which is the minimum length for a tenon, and on the other side there is the maximum diameter of 3 1/4" and maximum tenon length of 15/32". So as long as your tenon is between both ends in diameter and length it is usable.

Print Settings

Printer:

Sidewinder X1

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Category: Machine Tools

Tagi