1 / 2
Oneway Stronghold Chuck #2 Jaws Tenon Caliper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This caliper helps with sizing a tenon when using a Oneway Stronghold Chuck with #2 profiled jaws. On one side is the…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This caliper helps with sizing a tenon when using a Oneway Stronghold Chuck with #2 profiled jaws. On one side is the minimum diameter of 1 3/4" and the thickness is 3/16" which is the minimum length for a tenon, and on the other side there is the maximum diameter of 3 1/4" and maximum tenon length of 15/32". So as long as your tenon is between both ends in diameter and length it is usable.
Print Settings
Printer:
Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Category: Machine Tools