1 / 2
Majestic Dragon in standard sizes for 5e/other TTRPG miniature — zdjęcie 1
1 / 2

Majestic Dragon in standard sizes for 5e/other TTRPG miniature

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This version is scaled to for use with standard-sized bases for use with D&D 5e and other TTRPGs.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

If you print the base separately (recommended) you can glue it on using super glue (cyanoacrylate) according to the glue's instructions, or using a 3D pen.

For these sizes, I used https://i.imgur.com/HSpcnCO.jpg (posted at https://www.reddit.com/r/DnD/comments/8eow5z/comment/dxyjihm/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button)

I made the young and adults ones the max of each respective age category for fun, but they match the image well compared to the human. I made the ancient one minimum size to fit on the base well (since it is defined as gargantuan in 5e).

For reference, the original would be 40.836 feet at 1/60 scale (19.049' body, 21.787', so large adult, but base is 86mm which is about 3.387")--How these were measured:

1. Make a polyline that goes from head to tail (delete all but one or two points of a square, then extrude). In this case, where the tail starts could be back further, so my measurements aren't comparable to body and tail measurements in the Draconomicon probably (unless you use the full length).

2. I used to do it manually from here (using the MeasureIt extension then summing in a calculator), but the length of a line or polyline can now be measured using the "Sum of Edges to Height" button of my "MeshNav" add-on for Blender on GitHub: https://github.com/Hierosoft/blender-meshnav

Tagi