CNC Galileo 2 G2SA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A CNC version of Galileo 2 G2SA. The stepper plate is also compatible with G2Z.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Update 2026-06-15: New files for the body part. Filament hole is now 4mm for the PTFE tube. Much smoother and no filament scratching.
Please note: There's an issue with the filament scratching the sharp edges of the hole inside the body, so I need to have a look at that...
I'm just testing a CNC version of the G2SA and thought I could share it.
It's still a beta and if you make your own, please verify all measurements before ordering parts. Drawings and STEP files are available if you need to modify the parts.
2x different stepper plates and 1x body.
You can reuse most of the parts, but you also need:
1xM3x45
2xM3x35
1xM3x8
2x10x8x0.5 Shim