Floor rail attachment for Ford Tourneo Custom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this model and an M10 DIN603 bolt to attach anything to your Ford Tourneo Custom seat rails.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This model makes it easy to attach anything to the floor/seat rails of your Ford Tourneo Custom. All you need is this model, an M10 nut and an M10 DIN603 bolt of an appropriate length.
The best part is that this model is not load bearing. All of the weight is borne by the bolt. The model just serves as an in-situ wrench and to keep the bolt centered.
Usage:
Print the model using 100% infill.
Insert bolt head into the rail.
Push the clip onto the bolt.
Adjust extrusion ratio if the model is too tight or too loose.
Attach nut and tighten.
Use some kind of a spacer so as not to put tension on the plastic.
