1 / 6
RC Crawler Link Board / TRX4 / SCX10II / Building Tool for Crawler Links — zdjęcie 1
1 / 6

RC Crawler Link Board / TRX4 / SCX10II / Building Tool for Crawler Links

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Makes the most annoying part of the hobby a little easier. Read the description.

Ocena
0 / 5
Polubienia
5
Pobrania
49
Wydruki
0
Wyświetlenia
304
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

general

  • I often build crawlers with third-party links, custom links, and other rodends, and I always have problems getting the links to the exact right length.

  • That's exactly what these tools are for.

  • Currently only available for the TRX4 and SCX10II (my preferred platform).

  • Attention, the TRX4 link eye to eye lengths are well documented. Unfortunately, those of the SCX10II are not; there are different or contradictory sources, and the lengths used here are based on my own measurements.

print and assembly

  • Use a nozzle no larger than 0.4mm.

  • Print slowly so that the text is easy to read.

  • Screw M3x12 screws or longer into the board from below.

link construction method one

  • For complete link kits that need to be assembled.

  • Turn both rod ends until the link slides smoothly and easily onto the M3 screws.

  • Now they are the perfect length.

link construction method two

  • Slide the rod ends of your choice over both M3 screws.

  • Measure the distance between the two rod ends.

  • Cut the pipe or threaded rod to this length.

  • Repeat method one.