RC Crawler Link Board / TRX4 / SCX10II / Building Tool for Crawler Links
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes the most annoying part of the hobby a little easier. Read the description.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
general
I often build crawlers with third-party links, custom links, and other rodends, and I always have problems getting the links to the exact right length.
That's exactly what these tools are for.
Currently only available for the TRX4 and SCX10II (my preferred platform).
Attention, the TRX4 link eye to eye lengths are well documented. Unfortunately, those of the SCX10II are not; there are different or contradictory sources, and the lengths used here are based on my own measurements.
print and assembly
Use a nozzle no larger than 0.4mm.
Print slowly so that the text is easy to read.
Screw M3x12 screws or longer into the board from below.
link construction method one
For complete link kits that need to be assembled.
Turn both rod ends until the link slides smoothly and easily onto the M3 screws.
Now they are the perfect length.
link construction method two
Slide the rod ends of your choice over both M3 screws.
Measure the distance between the two rod ends.
Cut the pipe or threaded rod to this length.
Repeat method one.