25cm Ruler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple ruler 2mm thick
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
It's a simple ruler, 2mm thick
Notches have 0.2mm thickness,
Versions:
Diagonal version has notches on diagonal, good for Resin (DLP/LCD/SLA) prints.
Horisontal version has 2 horisontal levels, good for FDM prints
FDM settings:
Nozzle: 0.2mm or 0.4 (but then notches will be less clear)
Material: any, Personally printed in PLA
Ironing: topmost surfaces (I use 12% flow on my bambulab p1s)
Orientation: lines should be aligned with longer side, so it's not breaking on walls/layers
Layer height: for diagonal use as small as possible, for straight 0.2
Multimaterial: up to you, maybe will put colored 3mf here later
Knows Issues:
Diagonal version is bumpy, will shorten lines, so it doesn't affect straight lines the ruler