Pizza Slicer Blade Guard/Cover (85mm & 90mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-fit pizza slicer guard/cover (85/90mm). Use at your own risk!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Keep your fingers safe and protect your pizza cutter's edge in the kitchen drawer. This is a simple, slide-on blade guard designed for standard roller pizza slicers, available in 85mm and 90mm diameters.
It features a slightly tapered internal channel to friction-fit securely onto the blade without scratching or slipping off.
Recommended Print Settings
To get the perfect balance of flexibility and durability, use the following guidelines:
Material: PETG is highly recommended. It provides the necessary spring/flex to snap onto the blade over and over without snapping.
Layer Height: 0.15mm for clean internal overhangs and a smooth fit.
Supports: None. The model is optimized to print clean right off the bed.
Perimeters (Walls): Increase to 3 or 4 walls. This is crucial—it strengthens the hinge areas and gives the guard its spring tension without failing.
Infill: Gyroid (15-20%). Gives the solid areas uniform strength.
If you print one, please post a make and share what brand of slicer you paired it with!