Království Valerie ( Valeria: Card Kingdoms) - Player board overlay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Overlay for player board with wooden tokens. I created it for CZ version - not sure if other versions are the same.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Overlay for player board with wooden tokens. So that they dont move. I made it Tighter so the overlay stays on place.
I created it for CZ version - not sure if other versions are the same.
I also created Insert, that will fit these Overlays.:
https://www.printables.com/model/1749820-kralovstvi-valerie-valeria-card-kingdoms-insert
------------------
No supports needed for printing
I have used: Fusions360 for personal use
------------------
My print setup in Prusa Slicer
Nozzle - 6mm
Layers and perimeters:
Solid Layers - Top = 0; Bottom = 0
Perimeters - 3
Seam position - Aligned
Perimeter generator - Arachne
Infill
Fill density - 40% or 30%
Fill pattern - Cubic