Liczymy pasujące modele…
A co-worker of mine showed me a listing of one of these on Etsy and asked if I could make it for him. I said sure but I had a couple of concerns. First, the plate itself was made to replace your existing light switch plate and I'm not…
Remix of https://www.thingiverse.com/thing:2988374 with a hole to send energy to heat. I al;so attached the sheet I printed that was provided as a comment on the original edition. For the grids, you have to use the one from the original…
Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…
This overlay for Azul's player board keeps the tiles in place. It covers all of the board and stretches over the edge of the board to keep it in place. There are two versions, one divided into several parts for small printers and one…
Could not find a overlay to fit my printer. (Or that fitted properly) This overlay is 233mm x 233mm (Prints perfect on Creality CR-6 SE) There are 4 clips. The overlays fit inside the box. Print Settings Printer Brand: Creality Rafts: No…
Overview The model is meant for storage and organization of Frosthaven's overlay tiles. The organizer replaces one of the stock inserts that come in the box. The value of the organizer is that each set of overlay tiles is displayed in its…
Frosthaven included AoE abilities with complicated shapes that can be difficult to line up by eye. So I made these simple overlays that cover all non-trivially-shaped AoE abilities amongst three of the starter classes up to level 9. The…
Overlay for the Behringer X-Touch universal control surface when used with the XR18 or X18 or MR18 mixers. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR18 or X18 or…
This is a remix of https://www.thingiverse.com/thing:4159549 by Thomaswt However, I have combined the score and main tile sections into a single piece, and have shaved off the edges so it can be printed on a single 220mmx220mm bed (unlike…
I really liked both of these designs and wanted to combine them so that you could still slot cards underneath the player board and while also using as little filament as possible. I don't really know true 3d modeling design but I do know…
An overlay for the Terraforming Mars Turmoil expansion Terraforming Committee Board. Original turmoil delegates can fit in the chairs. The lobby is slightly tight but delegates will fit. Policy cards fit in perfectly as well. This design…
This is a overlay for the moon tiles in Terraforming Mars - Colonies expansion to get them fully enclosed.
Introducing a single-piece Terraforming Mars Player Mat overlay, printable in one piece on a Prusa Mini! Given that the Terraforming Mars Player Mat is larger than the printable area on the Prusa Mini, most existing player mats are either…
There were a few Space Base player board overlays available but I didn't really see a good solution to keeping them in place. Figured I could use it as an opportunity to learn some 3D modeling. Separated the original file into three…
This is a texture test for terrain tiles for Gloomhaven. Feel free to remix. Inspired by rbross and nestyr's tile sets. I still need to print these to make sure the texture dimensions are correct. Some of the cracks and land separations…
I created this print because the popular board game, “Tiny Epic Galaxies” player mat/playing pieces have a very low friction coefficient. During game play it is common for the pieces to slide from their proper position into an adjacent…
This is a remix of the overlay made by Stoniac. I have adjusted it a bit so it will not block the last Daimyo token. Category: Other
Overlays for the Mission Cards from Brandon Sanderson's Mistborn Deckbuilding game. It is very easy for the markers to get knocked around or off the cards. This overlay makes distinct slots for the markers to sit in, making it more…
Nakładka na hak o kuli średnicy 50 mm. Nakładka jest blokowana zapięciem z gwintem dokręcanym kluczem w zestawie. Gdyby wygięcie haka było zbyt ostre, należy skrócić klucz, by móc dokręcić zacisk. Hook cover with a ball diameter of 50 mm.…
This duchy grid is meant to replace the grid included in the castles of burgundy special edition by awaken realms. The semi-transparent grid is not aligned correctly with the hex spaces (as seen on the comparison image), which really bugs…
UPDATE 11/6/2024 - Added island board overlays These are overlays designed to fit the player boards and three island boards (Emerald, Gold, and Pearl) for the game Pirates of Maracaibo . These are designed to fit snugly over the boards to…
I really liked Jacques Botha's Azul overlay , but I didn't want to glue clips to my overlay. I have a large format printer so I had plenty of room to make an overlay that fit over the entire board. The overlay is 242mm x 242mm so it…
Introducing the Mini Rogue 3D second layer! 🎲🔥 Behold, a meticulously crafted 3D model designed for the Mini Rogue board game. Elevate your gameplay with this innovative creation that seamlessly integrates with player cards, providing a…
An easy to install overlay for your light switch. The Dual light switch model I used as a template to make the overlay was 130mm wide but the light switch in my home is 117mm wide so I've included both sizes.
This is a remix of my Azul overlay, but for a laser cutter instead. It uses the same 3D printed pawn as the original, and 2 new small identical 3D printed clips to fasten it to the board. The clips are sized for 3mm plywood and 2.25mm…
Definitely not necessary, but it's nice to have when you bump the table. I had to cut it to fit on a Prusa Mk3 but the dovetails work pretty well. The boards still fit side-by-side in the box. It printed pretty well in both PLA and PETG.…
I was tired of the bricks sliding if someone hit the table or the game board by mistake, so I wanted an overlay to hold the bricks. None of the others I found suited my needs, so I created my own. They can be used individually or 3 all…
I looked everywhere for an overlay for these tribe boards for Revive but the only one I could find was on Etsy with a designer who was unwilling to sell the .stl, opting instead to only sell an over priced physical print.. So, I decided I…
This is an extensive remix/modification of sl4ppy's Terraforming Mars playerboard overlay. Size has been increased by a few mm to fit the larger playerboards that are apparently shipping from Target now (Version I have). Also adjusted…
The model named Plate will need supports. Both of the switch pieces need to be printed twice. (untested)
I saw some really nice Mini Rogue mats with actual holes to place the pieces. I tried to create overlays to the Dungeon and Player mat. It's my first 3D model, so bear with me, but it's functional enough for me so I thought I'd share with…
Hi everyone, i created Player Board Overlay for Euthia. It is also split in 2 pieces so that it fits smaller print area like on my Ender 3V2. For the health marker, i will probably create some other solution (easier to print and more…
Designed a better overlay using 3mm acrylic that I cut on my CNC, used a 0 flute bit designed for plastics and it cut much better. Overlay is a bit shorter so I could get 2 player boards out of 1 sheet of 12"x12" acrylic. The 3D printed…
his is a remix of guiosca's simple gameboard overlay which I found excellent for its simplicity, speed of printing, and ability to print on a smaller format print bed. The changes are small. I increased the thickness 0.3mm to provide a…
This is a small collection of player aiding overlays etc. for the board game Merchants & Marauders. First and foremost is the overlay for the ship hit locations, which I found was very difficult to keep in place on the player board. I…
This overlay is to keep all of your 25mm base models in neat order on your Ikea Kvissle paper tray that you are using to hold your minis. Print two of these and you can opt to put in 6x3 mm magnets to hold it down on the tray (not really…
The stl is used for the bed model in PrusaSlicer.and is installed int the Printer Settings tab, Bed Shape Model dialog. Load the stl .file Normally the stls are in the PrusaSlicer\resources\models. The Overlay or what Prusa calls Texture…
Nothing changed except the male connection point. Slightly modified with a fillet and a slightly thinner connection area to fit better into the female connection point. Category: Toy & Game Accessories
These overlays are meant to replace the cardboard inserts (small, medium, and large) for the miniature bases in the X-Wing miniatures game (originally by FFG, now by AMG), especially for co-op scenario campaigns like Heroes of the Aturi…
Mismatching Tile Slots My copy of Frosthaven (first printing 2022) has two differently-cut versions of the Debris token (see last photo). One fit the original organizer but the others did not. Thus, I've adjusted the slot to fit both. I…
03/09/2023 : fix color of "0" on the energy line
Acrylic overlays for Wonderland's War player boards. There are two options for you: A - For a simple, single-layer overlay, just laser cut the “WW Overlay.dxf” file and rest it on top of your player board. If you know you're not going to…
Simple keyboard overlay for the 48k rubber key model. I had some of these back in the day and they are useful for adding labels above keys for simulation games (Elite, Gunship etc...) or business software with lots of keys. Two versions…
I made this Pine Tree to be used in place of the Frosthaven 3-hex overlay, but it'll work in any sort of TTRPG as well! To give it some more utility, I made the canopy and the trunk as separate parts. When aligned properly, the canopy can…
This is an overlay for Azul's player board that keeps the tiles in place. It covers all of the board and stretches over the edge of the board to keep it in place. There are two versions, one divided into several parts for small printers…
First of all, thanks to jacquesuk for creating this overlay, it looks and works great! This is a remix of the original design fitting a smaller build surface than 233x233mm. This is achieved by splitting the piece and adding dovetail…
This is a basic remix of the wonderful Tiny Epic Galaxies board game player mat overlay by Sherri making the back piece thinner to better fit the whole set within the original game box along with some other printed organizers. I removed…
Overlay for the Azul : Master Chocolatier board game. I could not find an overlay that fit the slightly different location of the chits. The pictures are printed with Polyterra Earth Brown on a PEO sheet at Bambu Labs X1C standard 0.2mm…
A player board overlay for Andromeda's Edge. 3mm thick. Two variations - one with modules on the left, the other with them on the right (unfortunately you can't just flip the overlay to the other side). Sized for a 250mm bed printer
I made this model to represent the Large Ice Crystal in Frosthaven! I tried to keep the general look of the cardboard overlay tile of a single large central crystal sprouting from a collection of smaller crystals, while also leaving…
If printed as a whole part, supports on the bed are required. It may be cut at 2mm height to separate riser and top part as in original model.
Decorative overlay on the front of the extruder, air intake. Wanted to make my printer look a little more fun. It is attached to glue🙃. Maybe not completely successful, I will be glad if someone suggests changes. I also wanted to make…
A solution to another problem that doesn't exist, because I own a 3d printer! Blood Rage Player mat overlays, attached with tiny pieces of poster putty. For a more simple solution, just use a tiny dot of poster putty on the tokens instead…
I was tired of having the coal and iron cubes unorganized and sloppy in the marketplace of Brass Birmingham. There are a few box insert prints which have lids which hold cubes, but they didn't work for me. So I designed this from scratch.…
I fixed the card spot for the long file to actually fit a standard token card. I also made it more symmetric.
Here's a model that I made for the Control Console overlay for Frosthaven! The game comes with 4 of these pieces (unless I've lost one somehow!). They're nice and easy prints with no supports required. As always, the .blend file and…
[PL] Moja interpretacja (remix) nakładki na klapkę baterii do popularnych głowic termostatycznych Tuya/Moes. Model został wykonany od podstaw, metodą prób i błędów dobrałem idealną średnicę wewnętrzną i kształt wycięcia na przyciski.…
An "overlay" of a Russian keyboard for anyone that needs it but doesn't have a Russian style keyboard. I am learning Russian using online resources and it was very hard to use a standard keyboard for the task since I still haven't…
Noise engineering is one of my favorite companies in the Eurorack space - and now that I have a versio module, I wanted to be able to quickly use the various flashable modes without having to refer back to a manual/screenshot all the…
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
Small clips (2.2 mm wide, with 0.6 mm sides) to secure the player mat overlays. Print in the illustrated orientation. Added curved versions to match the board corners. Print as shown in the second image
Terraforming Committee overlay for Terraforming Mars Fan Made Boards by Arnd Drifte I am a huge fan of Terraforming Mars and we got awesome fan-made boards from Arnd Drifte ( you can find the awesome boards here ). Huge thanks for his…
engine block Ził 157 overlay brush motor class 540, scale 1/10 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2 Infill: 20 Filament: Dosen't matter HT PLA doesn't matter Notes: engine block…
his is a car overlay/costume for Ozobot Eve. It measures 7,2cm x 3,9cm x 3,5cm. It is the Polish equivalent of the small-capacity car of the PRL "Fiat 126p" You sholud print it with supports.
This base overlay shows the arcs needed for the AI system introduced by Star Trek Alliance Dominion War Campaign , and can be used to turn any ship into an AI ship. (Please ignore the image showing a base ship card from a different…
This is overlay for mage wars arena player board to keep wooden cubes in place in the heat of the game. I used just some leftover PETG, 0,2mm Quality as print setting - print top resting on print plate to avoid any needs for supports.…
Why make another enemy HP tracker? When I get a game…I always check to see what I can print to make it better, or as a box insert, or certain utilities that make playing the game more enjoyable. I didn't really like the other options that…
This is a remix of two models made by two different makers; combining what I feel are the best parts of both of their designs. If, because of under-extrusion, it is a little loose than desired, shim it, tape it, or add a bit of superglue…
Still a bit of a work in progress, but overlay that should snugly fit around the planet ovals for the TM Colonies expansion. Print one first to see if sizing fits, and adjust accordingly by a percent up or down as needed.
Here's a model that I made for the Frosthaven Metal Cabinet overlay! There are four such tokens in the game, so I'd recommend printing out all four of them, especially because they're nice and easy to print with no support required! Not…
Hello all, There are too many elements on the wolf board and any movement of the table can ruin the game by throwing components around. That's why I created this overlay for the Czech version of wolves (the text boxes are placed according…
Overlay for Cthulhu Wars player mats. The included figure is tiny and the track is miniscule. A friend of mine requested these to improve visibility across the table and mostly for kicks. I included a frame to hold spell book tiles and…
SImple framing guide for Hasselblad 500CM cameras with a CFV50c digital back, without the appropriate focus screen.
Exact same as Exact same as this model https://www.printables.com/model/585630-terraforming-mars-player-mat-overlay/collections but with stl file whereas original model link only has gcode
The Snowflake class in Frosthaven has a card called White Winds with an attack ability shape that is difficult to clearly apply to maps. I decided to make an overlay template to make this task easier. One end of the chain is used to…
For smaller print beds, layer 2 of the Frosthaven Insert by Leon_H. This is a snap-together version (avoids glue).
A small overlay for the ship boards, designed to hold the tiles that are in Super Rookie's excellent tile enclosures. You will need to download Super Rookie's tile enclosures and print 72 copies, as well as five copies of this board…
Elevate your CMF Phone 2 Pro's aesthetic with this meticulously crafted layered decorative underlay. Designed to fit seamlessly beneath the official silicone case, this accessory adds a personalized touch without compromising the phone's…
This is a car overlay/costume for Ozobot eve. It measures 7.2cm x 4.8cm x 4.6cm. this is the Polish equivalent of PRL track: "ŻUK"
I recently purchased Azul and was sad to find that all the Azul overlays found on Printables did not fit this newer board. The squares were off by a few millimeters. I remixed the original overlay specifically to fit my board and only for…
After finally making to Frosthaven I was kinda of annoyed at how hard it was to tell the different types of terrain apart. It's been a problem for years with the other Havens tbh. JotL it was less so because the notes printed on the page.…
The size fits half the card as you can see in the photos, I'm going to make it smaller to only blocks the art and not the text itself. I didn't design the padlock itself ,or it was ai I don't remember..
Dominance marker for the overlay (available here ) of Terraforming Committee from Terraforming Mars: Turmoil. The overlay is a custom fit for a fan-made boards, see the overlay description. The model has not been printed yet, I am waiting…
I couldn't find where to buy broken threshold clips, so I tried to make them - they hold up great. Petg, infill 100%.
This is a remix of the player box from js500's brilliant Unconscious Mind insert to fit my insights boards overlays and client/dream card organizers . (Be sure to print the “_thin” variants of my models to be compatible with this remix.)
Given the excitement around Cyberpunk I wanted to add some related flair to my case. This design is pretty simple. It's a 'tray' in which to mount ws2812b LED strips and a press-fit 'frame' to stand the tray up vertically. The tray serves…
These are overlay tokens for the various effects of MTG-cards. The looks are based on the 2012 MTG game (PC), others are free interpretations. Not all effects or conditions are represented (yet); for some reason only the ones matching my…
The Castles of Burgundy special edition tiles overlay, split in half for easier printing.
Found its a bit tricky to touch the tiny pads on the TTP229 without mashing adjacent ones so knocked up this little overlay to help. Might make some different ones yet. Added the rsdoc for designspark mechanical if you want to edit it,…
A space base overlay with magnet connectors. I used 4x1mm circle magnets. Everyone loves the click of the magnets to put the overlay together. I also printed a clip that holds the overlay well. I glue the two pieces one for each side.…
Here's a model for the Glowing Orb! I was a little lost for how to make this anything more than just a sphere, but I eventually settled on a wrought iron stand for the sphere. In the end, it's actually a pretty easy print, with only three…
I made a model to use for the Power Conduit overlay! There are 6 of these in the box. They're difficult terrain, so I worked really hard to find a way to give a single power conduit (as depicted in the official artwork) a “flat” top layer…
When it is necessary to disguise the screw, different methods are used. I offer an overlay on a screw head
Good for photos, but not so good to wear as daily. I have to figure how to make it stable.
For best results print vertically, with bottom facing the back of the build plate. Seam Position: Back Enable "Make overhangs printable." if you can. Works nicely with my Intellivision game storage shelf.
X-Touch XR18 / MR18 - OSIMIDI Stage Overlay for use with OSIMidi Stage. I didnt want to use the stickers that you print off with the software, so edited the blank version of the original. This is set up so you can use your X touch via…
This remix is meant to accommodate storage for some lipped or other 3D printed player overlays. There is central storage for extra dice or cubes, as seen in my pictures. I printed in PLA, but it also works well with PETG. This is my first…
I made some wooden stairs to use for the Frosthaven overlay! Of course, I wanted them to be useful for more than just Frosthaven, so I made them to fit inside a standard 1 inch square for TTRPGs like D&D and Pathfinder. I also made a…
![Modified [Choose] Overlay Tiles Split Up Version, Snap-Together](https://media.printables.com/media/prints/1133698/images/8554736_2e7b2ada-832b-4cb5-a5e9-cfe6efbc2ecb_ac8fbef2-e657-40e3-8812-08d31f52062f/screenshot.png)
