T3PA Clutch MOD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod is fully printable, you only need some standard parts. It gives you a better feel for clutch on T3PA pedals.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 187
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this model because I wanted the clutch, on T3PA, to feel similar to real life. I based this concept on this photo. It is a compact design made for durability and stiffness. There also isn't any drilling needed to fix the mod onto the base, as I didn't want to "destroy" it. Basic principle: the point when spring is the most compressed isn't at the end but somewhere around 3/4.
I also tested it with BeamNG drive and got the clutch settings like this:
If you like my design please add a make, a like and I'm also open to any suggestions on how to improve it.
Parts needed:
- M6x20 (or more, the screw of the pedals base)
- M6 flat nut (fi18mm)
- 2x M4x25 (round head, prefer. Allen)
- 2x M4 nut
- M5x50 (round head, prefer. Allen)
- M5 nut
- M6 nylon insert nut
- M6x70 (partially threaded at end) (countersink head, if longer than 75mm doesn't matter)
- compression spring (max length 55mm, fi10mm) *you can use any spring that works for you
- 2x 608 bearing
- 3x M6x55*
- 3x M6 nut*
- 8x M6 washer*
parts are also in pdf file.
I recommend printing with PETG.