T3PA Clutch MOD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod is fully printable, you only need some standard parts. It gives you a better feel for clutch on T3PA pedals.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 16
- Makes
- 1
- Views
- 187
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this model because I wanted the clutch, on T3PA, to feel similar to real life. I based this concept on this photo. It is a compact design made for durability and stiffness. There also isn't any drilling needed to fix the mod onto the base, as I didn't want to "destroy" it. Basic principle: the point when spring is the most compressed isn't at the end but somewhere around 3/4.
I also tested it with BeamNG drive and got the clutch settings like this:
If you like my design please add a make, a like and I'm also open to any suggestions on how to improve it.
Parts needed:
- M6x20 (or more, the screw of the pedals base)
- M6 flat nut (fi18mm)
- 2x M4x25 (round head, prefer. Allen)
- 2x M4 nut
- M5x50 (round head, prefer. Allen)
- M5 nut
- M6 nylon insert nut
- M6x70 (partially threaded at end) (countersink head, if longer than 75mm doesn't matter)
- compression spring (max length 55mm, fi10mm) *you can use any spring that works for you
- 2x 608 bearing
- 3x M6x55*
- 3x M6 nut*
- 8x M6 washer*
parts are also in pdf file.
I recommend printing with PETG.