Thunderspin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a spinner for battle
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1300
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3 differents spinners design (firespin; waterspin, rubyspin) and you can mix the differents designs
2 versions for the launcher :
with the ball bearing
without the ball bearing
you'll need :
x1 https://www.amazon.fr/dp/B0DGGHMJYN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
x3 m3 plastic screw 6mm
to visualise : Shapr3D - Version publiée
I will add more spinner designs and another launcher is coming soon
Some advice for printing :
the infill in the spinner has to be : 100 % for the 2 part under and 15 % for the part on top
And be careful when you take out the support for the piece : engrenage / engrenage v2
And do not add support everywhere on the part on the top of the spinner ! only on the plate ! :)
It spin during 38 seconds with the normal launcher and the small zipper
It spin during 48 seconds with the normal launcher and the tall zipper