Thunderspin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a spinner for battle
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 130
- Makes
- 0
- Views
- 1,300
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3 differents spinners design (firespin; waterspin, rubyspin) and you can mix the differents designs
2 versions for the launcher :
with the ball bearing
without the ball bearing
you'll need :
x1 https://www.amazon.fr/dp/B0DGGHMJYN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
x3 m3 plastic screw 6mm
to visualise : Shapr3D - Version publiée
I will add more spinner designs and another launcher is coming soon
Some advice for printing :
the infill in the spinner has to be : 100 % for the 2 part under and 15 % for the part on top
And be careful when you take out the support for the piece : engrenage / engrenage v2
And do not add support everywhere on the part on the top of the spinner ! only on the plate ! :)
It spin during 38 seconds with the normal launcher and the small zipper
It spin during 48 seconds with the normal launcher and the tall zipper