Classic Mini Door Pocket with 10cm / 4" Speaker Opening
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door pockets for classic Minis with openings for 10cm / 4" speakers
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Add front speakers to your classic Mini!
These are new door pockets, that include a 10cm / 4" speaker mount.
I designed them to fit Pioneer TS-G1020F speakers, but they should fit other models as well.
The door pockets mount to the original screw locations, using the original screws.
At the bottom of the pocket, there is an opening for the speaker cable.
I routed the speaker cable through the door and out between the door and the door cart.
Because my printer is not big enough I split the pocket in three parts.
To glue the parts together, I used superglue.
To help with alignment, there are holes at the end of each seam.
Use 10mm long bits of M3 threaded rod or similar to align the parts.
I used some bondo / putty, sanding and a couple layers of spray paint to make the parts nicer and uniform.
Printing:
Print with PETG, AGS or ASA with 4 walls and (organic) support.
Print with the front side facing down, i would recommend a brim to prevent warping.