1 / 6
Print in Place Foldable Travel Clothing Hanger - No Hardware Needed — zdjęcie 1
1 / 6

Print in Place Foldable Travel Clothing Hanger - No Hardware Needed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to be durable and easily folded and stored for travel, camping, or home use and then expand to full size

Ocena
3 / 5
Polubienia
14
Pobrania
47
Wydruki
1
Wyświetlenia
250
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This hanger was designed to be durable and easily folded and stored for travel, camping, or home use and then expand to the size of a standard hanger. It has the following attributes:

  • Can support 5 lbs (2.3 kg) or more (see photo).

  • Shaped to hold or hang a variety of personal items

  • 3 1/8 x 5 1/5 x 7/16"" (80 x 130 x 11 mm) folded size

  • Prints on standard 3D printer build plates as small as 170x170mm

  • Requires no hardware or assembly. Just remove supports and flex joints

Though not a remix, a similar model can be found at:

Hangers such as this can be found on retail sites for purchase.

Revisions:

July 2, 2026:

Hanger V2 Lower Hook v2.2.6 brings small structural enhancements around neck and central pivots to increase strength. Regular PLA with an infill of 40% now supporting 5 lbs. (2.7 kg).

June 26, 2026:

Version 2 (Hanger V2 Lower Hook v2.2.4.stl) relocates the dress hooks under the hanger for a smoother line for knits and hang to dry clothes. It also has a more evolved design and reinforcements. An updated model with the dress hooks on the top is in the works to function like the original (Hanger_v3.1).

Filament Recommendations:

I tested the hanger outside on a warm (90F 33C) day, 60+% humidity, in the shade and sun for 24 hours with a 5 lb (2.7 kg) weight attached. PCTG, PETG, and PCTG-CF help up for weeks with 40% infill. PLA and PLA+  works for indoor use. But, chances are the average clothing item is less than 5 pounds, so experiment! ABS, ASA, and other plastics will be tested in the future.

Note: For a print with 40% infill, 36 grams will be for the hanger with 6 grams of waste for supports. See support instructions for more details.

The model requires supports. I enabled supports and selected the On buikd plate only, Support critical regions only, and Remove small overhangs. I used default Tree supports and ensured that the Sparse infill density was 40%.

Tagi