1 / 6
Print in Place Foldable Travel Clothing Hanger - No Hardware Needed — image 1
1 / 6

Print in Place Foldable Travel Clothing Hanger - No Hardware Needed

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed to be durable and easily folded and stored for travel, camping, or home use and then expand to full size

Rating
3 / 5
Likes
14
Downloads
47
Makes
1
Views
250
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This hanger was designed to be durable and easily folded and stored for travel, camping, or home use and then expand to the size of a standard hanger. It has the following attributes:

  • Can support 5 lbs (2.3 kg) or more (see photo).

  • Shaped to hold or hang a variety of personal items

  • 3 1/8 x 5 1/5 x 7/16"" (80 x 130 x 11 mm) folded size

  • Prints on standard 3D printer build plates as small as 170x170mm

  • Requires no hardware or assembly. Just remove supports and flex joints

Though not a remix, a similar model can be found at:

Hangers such as this can be found on retail sites for purchase.

Revisions:

July 2, 2026:

Hanger V2 Lower Hook v2.2.6 brings small structural enhancements around neck and central pivots to increase strength. Regular PLA with an infill of 40% now supporting 5 lbs. (2.7 kg).

June 26, 2026:

Version 2 (Hanger V2 Lower Hook v2.2.4.stl) relocates the dress hooks under the hanger for a smoother line for knits and hang to dry clothes. It also has a more evolved design and reinforcements. An updated model with the dress hooks on the top is in the works to function like the original (Hanger_v3.1).

Filament Recommendations:

I tested the hanger outside on a warm (90F 33C) day, 60+% humidity, in the shade and sun for 24 hours with a 5 lb (2.7 kg) weight attached. PCTG, PETG, and PCTG-CF help up for weeks with 40% infill. PLA and PLA+  works for indoor use. But, chances are the average clothing item is less than 5 pounds, so experiment! ABS, ASA, and other plastics will be tested in the future.

Note: For a print with 40% infill, 36 grams will be for the hanger with 6 grams of waste for supports. See support instructions for more details.

The model requires supports. I enabled supports and selected the On buikd plate only, Support critical regions only, and Remove small overhangs. I used default Tree supports and ensured that the Sparse infill density was 40%.

Tags